Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 20-F

(Mark One)

OR

For the fiscal year ended 31 March 2014

OR

OR

Date of event requiring this shell company report

For the transition period from              to             

Commission file number 1-15240

JAMES HARDIE INDUSTRIES plc

Formerly Known As James Hardie Industries SE

(Exact name of Registrant as specified in its charter)

N/A

(Translation of Registrant’s name into English)

Ireland

(Jurisdiction of incorporation or organisation)

Europa House, Second Floor

Harcourt Centre

Harcourt Street, Dublin 2, Ireland

(Address of principal executive offices)

Natasha Mercer

(Contact name)

353 1411 6924 (Telephone)        353 1479 1128 (Facsimile)

Securities registered or to be registered pursuant to Section 12(b) of the Act:

Table of Contents

Securities registered or to be registered pursuant to Section 12(g) of the Act.

None.

Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act.

None.

Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered by the annual report. 445,033,502 shares of common stock at 31 March 2014.

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  x  Yes  ¨  No

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.  ¨  Yes  x  No

Note – Checking the box will not relieve any registrant required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 from their obligations under those Sections.

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days.  x  Yes   ¨  No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  x  Yes  ¨  No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See the definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing:

If “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has elected to follow:

¨  Item 17  ¨   Item 18

If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  ¨  Yes   x  No

Table of Contents

TABLE OF CONTENTS

In this annual report, unless the context otherwise indicates, James Hardie Industries plc, a “public limited company,” or a European company incorporated and existing under the laws of Ireland, is referred to as JHI plc. JHI plc. together with its direct and indirect wholly owned subsidiaries as of the time relevant to the applicable reference, are collectively referred to as the James Hardie Group. JHI plc and its current direct and indirect wholly owned subsidiaries are collectively referred to as “we,” “us,” “our,” “JHI plc and its wholly owned subsidiaries,” “James Hardie” or the “Company.”

Table of Contents

For certain information about the basis of preparing the financial information in this Annual Report, see Section 2, “Reading this Report.” In addition, this Annual Report contains statements that constitute “forward-looking statements.” For an explanation of forward-looking statements and the risks, uncertainties and assumptions to which they are subject, see Section 2, “Reading this Report.”

A “Glossary of Abbreviations and Definitions” has also been included under Section 4 of this Annual Report.

Information contained in or accessible through the websites mentioned in this Annual Report does not form part of this report unless we specifically state that it is incorporated by reference and forms part of this report. All references in this report to websites are inactive textual references and are for information only.

Table of Contents

FORM 20-F CROSS REFERENCE INDEX

Table of Contents

FORM 20-F CROSS REFERENCE INDEX

(Continued)

Table of Contents

SECTION 1

INTRODUCTION

The Company is a world leader in manufacturing fibre cement siding and backerboard. Our current primary geographic markets include the United States (“US”), Australia, New Zealand, the Philippines, Europe and Canada.

Our fibre cement products are used in a number of markets, including new residential construction, manufactured housing, repair and remodelling and a variety of commercial and industrial applications.

We manufacture numerous types of fibre cement products with a variety of patterned profiles and surface finishes for a range of applications, including external siding and soffit lining, internal linings, facades and floor and tile underlay.

We employ approximately 3,100 people and generated net sales of US$1.5 billion in fiscal year 2014.

SELECTED FINANCIAL DATA

We have included in this annual report the audited consolidated financial statements of the Company, consisting of our consolidated balance sheets as of 31 March 2014 and 2013, and our consolidated statements of operations and comprehensive income, changes in shareholders’ (deficit) equity and cash flows for each of the years ended 31 March 2014, 2013 and 2012, together with the related notes thereto. The consolidated financial statements included in this annual report have been prepared in accordance with accounting principles generally accepted in the US, or “US GAAP.”

The selected consolidated financial information summarised below for the five most recent fiscal years has been derived in part from the Company’s financial statements. You should read the selected consolidated financial information in conjunction with the Company’s financial statements and related notes contained in Section 2, “Consolidated Financial Statements” and with the information provided in Section 2, “Management’s Discussion and Analysis.” Historic financial data is not necessarily indicative of our future results and you should not unduly rely on it.

Table of Contents

Table of Contents

Table of Contents

INFORMATION ON THE COMPANY

History and Development of the Company

The Company was established in 1888 as an import business. In 1951, the Company became publicly owned as a listed company on the Australian Stock Exchange. After becoming a listed company, the Company built up a diverse portfolio of building and industrial products including a wide range of asbestos-based products. In the mid-1980s, we pioneered the development of asbestos-free fibre cement technology and began designing and manufacturing a wide range of fibre cement building products that made use of the benefits that came from the products’ durability, versatility and strength. Using the technical and manufacturing expertise developed in Australia, we expanded our operations, in particular to the United States, to become a specialised manufacturer of a wide range of fibre cement building materials.

Our legal name was changed to James Hardie Industries N.V. from RCI Netherlands Holdings B.V. in July 2001 when our legal form was converted from a “besloten vennootschap met beperkte aansprakelijkheid” (“B.V.”), to a “naamloze vennootschap” ( “N.V.”), or a Dutch public limited liability company whose stock, unlike a private limited liability company, may be transferred without executing a notarial deed if such company is listed on a recognised stock exchange. In February 2001, the shareholders of James Hardie Industries Limited (“JHIL”) agreed to exchange their shares for shares in

Table of Contents

James Hardie Industries N.V., which retained its primary listing on the Australian Securities Exchange (“ASX”). In October 2001, JHIL transferred all of its fibre cement businesses from to James Hardie Industries N.V. In February 2010, our legal name was changed to James Hardie Industries SE when our legal form was converted from a Dutch N.V. to a Dutch Societas Europaea (“SE”) in connection with the implementation of Stage 1 of a two-stage re-domicile proposal (together, the “re-domicile”) to change our registered corporate domicile from The Netherlands to Ireland. On 17 June 2010, we implemented Stage 2 of the re-domicile and changed our registered corporate domicile to Ireland to become an Irish SE and became an Irish tax resident on 29 June 2010. On 15 October 2012, we converted from an Irish SE into an Irish public limited company (“plc”).

We conduct our operations under legislation in various jurisdictions. As an Irish plc we are governed by the Irish Companies Acts. In addition, we operate under the regulatory requirements of numerous jurisdictions and organisations, including the ASX, ASIC, the New York Stock Exchange (“NYSE”), the United States Securities and Exchange Commission (“SEC”), the Irish Takeover Panel and various other rulemaking bodies.

Our corporate domicile is located in Ireland. The address of our registered office in Ireland is Europa House, Second Floor, Harcourt Centre, Harcourt Street, Dublin 2, Ireland. The telephone number there is +353 1411 6924. Our agent in the United States is CT Corporation. Its office is located at 3 Winners Circle, 3rd Floor, Albany, New York 12205.

Corporate Restructuring

On 17 May 2011, we announced that we had commenced an internal reorganisation involving the simplification of our corporate structure, including some of the arrangements which were previously part of our Netherlands domicile. This internal reorganisation was made to facilitate the ability to access and distribute surplus cash flows and earnings of our operating subsidiaries more efficiently, including for the purpose of making periodic contributions to AICF. As part of this restructure, the Company incurred a tax charge of US$32.6 million on undistributed earnings of its US subsidiaries during fiscal year 2011, related to the remittance of US earnings as part of the internal reorganisation.

The following is a simplified diagram of our current corporate structure:

Consolidation of AICF

In February 2007, our shareholders approved the AFFA entered into on 21 November 2006 to provide long-term funding to AICF. JHI plc owns 100% of James Hardie 117 Pty Ltd (the “Performing Subsidiary”) that funds AICF subject to the provisions of the AFFA. We appoint three of AICF’s directors and the New South Wales (“NSW”) Government appoints two of AICF’s directors.

Table of Contents

Under the terms of the AFFA, the Performing Subsidiary has an obligation to make payments to AICF on an annual basis. The amount of these annual payments is dependent on several factors, including our free cash flow (as defined in the AFFA), actuarial estimations, actual claims paid, operating expenses of AICF and the annual cash flow cap. JHI plc guarantees the Performing Subsidiary’s obligation. As a result, for purposes of US GAAP, we consider JHI plc to be the primary beneficiary of AICF.

Although we have no legal ownership in AICF, for financial reporting purposes, our interest in AICF is considered variable and we consolidate AICF due to our pecuniary and contractual interests in AICF as a result of the funding arrangements outlined in the AFFA. Our consolidation of AICF results in a separate recognition of the asbestos liability and certain other asbestos-related assets and liabilities on our consolidated balance sheet. Among other items, we record a deferred tax asset for the anticipated future tax benefit we believe is available to us that arises from amounts contributed to the asbestos fund by the Performing Subsidiary. Since fiscal year 2007, movements in the asbestos liability arising from changes in foreign currency or actuarial adjustments are classified as asbestos adjustments, and the income tax benefit arising from contributions to AICF is included within income tax benefit on our consolidated statements of operations and comprehensive income when realised. See Note 2 to our consolidated financial statements in Section 2.

Business Overview

General Overview of our Business

Based on net sales, we believe we are the largest manufacturer of fibre cement products and systems for internal and external building construction applications in the United States, Australia, New Zealand, and the Philippines. We market our fibre cement products and systems under various Hardie brand names, such as HardieBacker^® boards, and other brand names such as Artisan^® Lap and Artisan^TM Accent Trim by James Hardie, Cemplank^® and Prevail^® siding (we also formerly marketed siding under the brand name Sentry^TM siding), and Scyon™ advanced lightweight cement composite products such as Scyon™ Stria™ cladding. We believe that, in certain applications, our fibre cement products and systems provide a combination of distinctive performance, design and cost advantages when compared to other fibre cement products and alternative products and systems that use solid wood, engineered wood, vinyl, brick, stucco or gypsum wallboard. The sale of fibre cement products in the United States accounted for 73%, 70% and 67% of our total net sales in fiscal years 2014, 2013 and 2012, respectively.

Our fibre cement products are used in a number of markets, including new residential construction (single and multi-family housing), manufactured housing (mobile and pre-fabricated homes), repair and remodelling and a variety of commercial and industrial applications (stores, warehouses, offices, hotels, motels, schools, libraries, museums, dormitories, hospitals, detention facilities, religious buildings and gymnasiums). We manufacture numerous types of fibre cement products with a variety of patterned profiles and surface finishes for a range of applications, including external siding and soffit lining, internal linings, facades, and floor and tile underlayments.

In contrast to some other building materials, fibre cement provides durability attributes, such as strong resistance to damage from moisture, fire, impact and termites, requires relatively little maintenance and can be used as a substrate to create a wide variety of architectural effects with textured and coloured finishes.

Table of Contents

The breakdown of our net sales by operating segment for each of our last three fiscal years is as follows:

Industry Overview

US Housing Industry and Fibre Cement Industry

In the United States, fibre cement is principally used in the residential building industry. Such usage fluctuates based on the level of new home construction and the repair and remodelling of existing homes. The level of activity is generally a function of interest rates and the availability of financing to homeowners to purchase a new home or make improvements to their existing homes, inflation, unemployment levels, demographic trends, gross domestic product growth and consumer confidence. Demand for building products is also affected by residential housing starts and existing home sales, the age and size of the housing stock and overall home improvement expenditures. According to the US Census Bureau, single family housing starts, which are one of the key drivers of the Company’s performance, were up 9% to 615,400 for fiscal year 2014, compared to fiscal year 2013.

In the United States, the largest application for fibre cement products is in the external siding industry. Siding is a component of every building and it usually occupies more square footage than any other external building component, such as windows and doors. Selection of siding material is based on installed cost, durability, aesthetic appeal, strength, weather resistance, maintenance requirements and cost, insulating properties and other features. Different regions of the United States show a decided preference amongst siding materials according to economic conditions, weather, materials availability and local preference. The principal siding materials are vinyl, stucco, fibre cement, solid wood and brick. Vinyl has the largest share of the siding market.

International Fibre Cement Industry

In Australia and New Zealand, fibre cement building products are used in both the residential and commercial building industries with applications in external siding, internal walls, ceilings, floors, soffits and fences. The residential building industry represents the principal market for fibre cement products. We believe the level of activity in this industry is generally a function of interest rates, inflation, unemployment levels, demographic trends, gross domestic product growth and consumer confidence. Demand for fibre cement building products is also affected by the level of new housing starts and renovation activity.

Australia

According to Australian Bureau of Statistics, the total number of dwellings approved for fiscal year 2014 were 186,449, an increase of 21% compared to fiscal year 2013. Further, approvals for detached houses, which are the primary driver of the Asia Pacific business’ sales volume, were 104,394 for fiscal year 2014, an increase of 16%, compared to fiscal year 2013.

Former subsidiaries of ABN 60 Pty Limited (“ABN 60”) developed fibre cement in Australia as a replacement for asbestos cement in the early 1980s. Asbestos cement sheet production ceased in the

Table of Contents

early 1980s and asbestos cement pipe production ceased in 1987. Competition for fibre cement has intensified over the past decade in Australia. In addition to competition from solid wood, engineered wood, wallboard, masonry and brick, two Australian competitors have established fibre cement manufacturing facilities in Australia and fibre cement imports are also growing.

New Zealand

According to Statistics New Zealand, the total number of new dwelling consents excluding apartments, the primary driver of the New Zealand business’ net sales were 19,768, an increase of 25% compared to fiscal 2013.

Competition continues to intensify in New Zealand as fibre cement imports have become more cost competitive and overseas manufacturers struggling with the global recession look for additional markets to add to their existing ones.

Philippines

In the Philippines and other Asian and Middle Eastern (Israel, Kuwait, Qatar and the United Arab Emirates) markets, fibre cement building products are used in both the residential and commercial building industries with applications in ceilings, internal walls and external siding, facades and soffits. The residential building industry represents the principal market for fibre cement products. In general, fibre cement products have, across a range of product applications, gained broader acceptance in these regions over the last decade. In the Philippines, additional imported fibre cement products have entered the market. However, in some of the developing markets, gypsum usage has increased and penetrated into fibre cement applications. Fibre cement and asbestos cement production facilities are located throughout Asia and exporting between countries is common practice. Unlike some of our competitors in the Asian market, we do not manufacture fibre cement products containing asbestos. We believe that fibre cement has good long-term growth potential because of the benefits of light-weight and framed construction compared to traditional masonry construction. In addition, we believe the opportunity to replace wood-based products, such as plywood, with more durable fibre cement will be attractive to some consumers in some of these markets.

Europe

In Europe, fibre cement building products are used in both residential and commercial building applications in external siding, internal walls, floors, soffits and roofing. We compete in most segments except roofing and promote the use of fibre cement products against traditional masonry, gypsum-based products and wood-based products. Since we commenced selling our products in Europe in fiscal year 2004, we have continued to work to grow demand for our products by building awareness among distributors, builders and contractors. Management believes that the growth outlook for fibre cement in Europe is favourable in light of stricter insulation requirements driving demand for advanced exterior cladding systems as well as better building practices increasing the use of fibre cement in interior applications.

Products

We manufacture fibre cement products in the United States, Australia, New Zealand and the Philippines. Our total product offering is aimed at the building and construction markets, including new residential construction, manufactured housing, repair and remodelling and a variety of commercial and industrial building applications.

We offer a wide range of fibre cement products for both exterior and interior applications. In the United States and elsewhere, our products are typically sold as planks or flat sheets with a variety of

Table of Contents

patterned profiles and finishes. Planks are used for external siding while flat sheets are used for internal and external wall linings and floor and tile underlayments. Outside the United States, we also manufacture fibre cement products for use in other applications such as building facades, lattice, fencing, decorative columns, flooring, soffit lining and ceiling applications, some of which have not yet been introduced into the United States.

We developed a proprietary technology platform that enables us to produce thicker yet lighter-weight fibre cement products that are generally lighter and easier to handle than traditional building products. The first application of this technology in the United States has been our HardieTrim^® board. HardieTrim board is a fibre cement trim product that is used on the exterior of residential and commercial construction to replace traditional wood and engineered wood trim. HardieTrim board was launched in fiscal year 1999, with the introduction of HardieTrim HLD board.

We believe that our products provide certain performance, design and cost advantages. The principal fibre cement attributes in exterior applications are durability and low maintenance, particularly when compared to competing wood and wood-based products, while offering comparable aesthetics. Our fibre cement products exhibit resistance to the damaging effects of moisture, fire, impact and termites compared to wood and wood-based products, which we believe has enabled us to gain a competitive advantage over competing products. Vinyl siding products generally have better durability characteristics than wood-based products, but typically cannot duplicate fibre cement’s aesthetics and the characteristics necessary for effectively accepting paint applications.

Our fibre cement products provide strength and the ability to imprint patterns that closely resemble patterns and profiles of traditional materials such as wood and stucco. The surface properties provide an effective paint-holding finish, compared to wood and engineered wood products, such that the periods between necessary maintenance and repainting are generally longer. Compared to masonry construction, fibre cement is lightweight, physically flexible and can be cut using readily available tools. This makes fibre cement suitable for lightweight construction across a range of architectural styles. Fibre cement is well suited to both timber and steel-framed construction.

In our interior product range, we believe our ceramic tile underlayment products exhibit better handling and installation characteristics compared to fibreglass mesh cement boards. Compared to wood and wood-based products, our products provide the same general advantages that apply to external applications. In addition, our fibre cement products exhibit less movement in response to exposure to moisture than many alternative competing products, providing a more consistent and durable substrate on which to install tiles. In internal lining applications where exposure to moisture and impact damage are significant concerns, our products provide superior resistance to moisture damage and impact resistance than traditional gypsum wet area wallboard and other competing products.

In the United States, the following new products were released over the last five years:

Table of Contents

In Australia and New Zealand, new products released over the past five years in the Scyon™ lightweight advanced cement composite range include Stria™ Splayed cladding, and Axent™ trim. In the James Hardie product range; in Australia and New Zealand over the same timeframe, new products include Invibe™ panels and Inraw™ panels; and in New Zealand only, RAB™ PreClad™ Lining and Horizon™ Lining products were released. In both countries, new product launches have been supported by the launch of energy efficiency related accessories such as HardieBreak™ thermal break tape as well as web based initiatives such as the ACCEL™ suite of online product information, calculator and application tools, the LookHome™ and LightHome™ e-zines as well as the SmarterGreen™, SmarterPartner™, SmarterDesign™ and The Smarter Small Home™ initiatives. In New Zealand, The Drawing Board™ online design tool provides an aid to smart design using James Hardie products.

In the Philippines, new products released over the past five years include Hardieplank™ Siding, Hardiefloor™ Systems and Hardiepattern™ Boards. The established Hardieflex™ board range has been extended to include Hardieflex™ Wet Area lining boards and Hardieflex™ Pro primarily for wet area application.

In fiscal year 2004, we commenced our European fibre cement business by distributing our fibre cement products in the United Kingdom and France. We also manufacture fibre cement pipes in Australia and previously manufactured fibre cement pipes and roofing products in the United States. In May 2008 and April 2006, we ceased operation of our pipes and roofing businesses, respectively, in the United States.

Seasonality

Our earnings are seasonal and typically follow activity levels in the building and construction industry. In the United States, the calendar quarters ending in December and March generally reflect reduced levels of building activity depending on weather conditions. In Australia and New Zealand, the calendar quarter ending in March is usually affected by a slowdown due to summer holidays. In the Philippines, construction activity diminishes during the wet season from June through September and during the last half of December due to the slowdown in business activity over the holiday period. Also, general industry patterns can be affected by weather, economic conditions, industrial disputes and other factors. See Section 3, “Risk Factors.”

Raw Materials

The principal raw materials used in the manufacture of fibre cement are cellulose fibre (wood-based pulp), silica (sand), Portland cement and water.

Cellulose Fibre. Reliable access to specialised, consistent quality, low cost pulp is critical to the production of fibre cement building materials. Cellulose fibre is sourced from New Zealand, the United States, Canada, and Chile and is processed to our specifications. It is further processed using our proprietary technology to provide the reinforcing material in the cement matrix of fibre cement. We have developed a high level of internal expertise in the production and use of wood-based pulps. This expertise is shared with our pulp producers, which have access to appropriate raw wood stocks, in order to formulate superior reinforcing pulps. The resulting pulp formulas are typically proprietary and are the subject of confidentiality agreements between the pulp producers and us. Moreover, we have

Table of Contents

obtained patents in the United States and in certain other countries covering certain unique aspects of our pulping formulas and processes that we believe cannot adequately be protected through confidentiality agreements. However, we cannot assure you that our intellectual property and other proprietary information will be protected in all cases. See Section 3, “Risk Factors.” We have entered into contracts that provide discounted pulp prices relative to various pulp indices and we purchase our pulp from several qualified suppliers in an attempt to mitigate price increases and supply interruptions.

Pulp has historically demonstrated more price sensitivity than other raw materials that we use in our manufacturing process. In fiscal year 2014, the average Northern Bleached Softwood Kraft (“NBSK”) pulp price relative to our US business was US$971 per ton, an 11% increase compared to fiscal year 2013.

Silica. High purity silica is sourced locally by the various production plants. In the majority of locations, we use silica sand as a silica source. In certain other locations, however, we process quartz rock and beneficiate silica sand to ensure the quality and consistency of this key raw material.

Cement. Cement is acquired in bulk from local suppliers and is supplied on a just-in-time basis to our manufacturing facilities. The silos at each fibre cement plant hold between one and three days of our cement requirements. We continue to evaluate options on agreements with suppliers for the purchase of cement that can fix our cement prices over longer periods of time.

Water. We use local water supplies and seek to process all wastewater to comply with environmental requirements.

Sales, Marketing and Distribution

The principal markets for our fibre cement products are the United States, Australia, New Zealand, the Philippines, Canada, and in parts of Europe, including the United Kingdom and France. In addition, we sell fibre cement products in many other markets, including Belgium, China, Denmark, France, French Caribbean, Germany, Hong Kong, Hungary, India, Indonesia, Ireland, Italy, Malta, Mexico, the Middle East (Israel, Kuwait, Qatar and the United Arab Emirates), The Netherlands, Norway, various Pacific Islands, South Africa, South Korea, Spain, Sri Lanka, Switzerland, Taiwan, Turkey and Vietnam. Our brand name, customer education in comparative product advantages, differentiated product range and customer service, including technical advice and assistance, provide the basis for our marketing strategy. We offer our customers support through a specialised fibre cement sales force and customer service infrastructure in the United States, Australia, New Zealand, the Philippines and Europe (which is based out of The Netherlands). The customer service infrastructure includes inbound customer service support coordinated nationally in each country (customer service support for Canada is based out of the United States and customer service support for Europe is based out of The Netherlands), and is complemented by outbound telemarketing capability. Within each regional market, we provide sales and marketing support to building products dealers and lumber yards and also provide support directly to the customers of these distribution channels, principally homebuilders and building contractors.

In the United States, we sell fibre cement products for new residential construction predominantly to distributors, which then sell these products to dealers or lumber yards. This two-step distribution process is supplemented with direct sales to dealers and lumber yards as a means of accelerating product penetration and sales. Repair and remodel products in the United States are typically sold through the large home centre retailers and specialist distributors. Our top five US customers accounted for approximately 50% of our total USA and Europe Fibre Cement gross sales in fiscal year 2014. In Australia and New Zealand, both new construction and repair and remodel products are generally sold directly to distributor/hardware stores and lumber yards rather than through the two-step

Table of Contents

distribution process. In the Philippines, a network of thousands of small to medium size dealer outlets sells our fibre cement products to consumers, builders and real estate developers, although in recent years, do-it-yourself type stores have started to enter the Philippines market. Physical distribution of product in each country is primarily by road or sea transport, except in the United States where transportation is primarily by road and, to a lesser extent, by rail. Fibre cement products manufactured in Australia, New Zealand and the Philippines are exported to a number of markets in Asia, the Pacific, and the Middle East (Israel, Kuwait, Qatar and the United Arab Emirates) by sea transport.

We maintain dedicated regional sales management teams in our major sales territories. As of 31 May 2014, the sales teams (including telemarketing staff) consisted of approximately 334 regular and 1 part-time employees in the United States and Canada, 66 people in Australia, 23 people in New Zealand, 38 people in the Philippines, and 31 people in Europe. We also employ one person based in Hong Kong who functions as a regional export salesperson, and who covers markets such as South Korea, Hong Kong, Macau, China and the Middle East (Israel, Kuwait, Qatar and the United Arab Emirates). Our national sales managers and national account managers, together with the regional sales managers and sales representatives, maintain relationships with national and other major accounts. Our sales force includes skilled trades people who provide on-site technical advice and assistance. In some cases, sales forces manage specific product categories.

Despite the fact that distributors and dealers are generally our direct customers, we also aim to increase primary demand for our products by marketing our products directly to homeowners, architects and builders. We encourage them to specify and install James Hardie^® products because of the quality and craftsmanship of our products. This “pull through” strategy, in turn, assists us in expanding sales for our distribution network as distributors benefit from the increasing demand for our products.

Geographic expansion of our fibre cement business has occurred in markets where framed construction is prevalent for residential applications or where there are opportunities to change building practices from masonry to framed construction. Expansion is also possible where there are direct substitution opportunities irrespective of the methods of construction. Our entry into the Philippines is an example of the ability to substitute fibre cement for an alternative product (in this case plywood). With the exception of our current major markets, as well as Japan and certain rural areas in Asia, Scandinavia, and Eastern Europe, most markets in the world principally utilise masonry construction for external walls in residential construction. Accordingly, further geographic expansion depends substantially on our ability to provide alternative construction solutions and for those solutions to be accepted in those markets.

Because fibre cement products were relatively new to the Philippines, the launch of our fibre cement products in the Philippines in fiscal year 1999 was accompanied by strategies to address the particular needs of local customers and the building trade. For example, we established a carpenter training and accreditation program whereby Filipino carpenters who are unfamiliar with our products are taught installation techniques. Our training programs for counter clerks and carpenters are geared not only to educate them but also to develop them as brand advocates. We have also put greater emphasis on building our relationships with new home developers and builders in order to educate the market on the benefits of our products in this particular sector.

Dependence on Trade Secrets and Research and Development

We pioneered the successful development of cellulose reinforced fibre cement and, since the 1980s, have progressively introduced products developed as a result of our proprietary product formulation and process technology. The introduction of differentiated products is one of the core components of our global business strategy. This product differentiation strategy is supported by our significant investment in research and development activities.

Table of Contents

The following table sets forth our research and development expenditures for the three preceding fiscal years:

Our current patent portfolio is based mainly on fibre cement compositions, associated manufacturing processes and the resulting products. Our non-patented technical intellectual property consists primarily of our operating and manufacturing know-how, which is maintained as trade secret information. We have enhanced our abilities to effectively create, manage and utilise our intellectual property and have implemented a strategy that increasingly uses patenting, licensing, trade secret protection and joint development to protect and increase our competitive advantage. However, we cannot assure you that our intellectual property and other proprietary information will be protected in all cases. In addition, if our research and development efforts fail to generate new, innovative products or processes, our overall profit margins may decrease and demand for our products may fall.

In addition, the Company owns a variety of patents and licences; industrial, commercial and financial contracts; and manufacturing processes. While the Company is dependent on the competitive advantage that these items provide as a whole, the Company is not dependent on any one of them individually and does not consider any one of them individually to be material. We do not materially rely on intellectual property licensed from any outside third parties. See Section 3, “Risk Factors.”

Governmental Regulation

As noted above, on 15 October 2012, we converted into an Irish plc from an Irish SE and are now governed by the Irish Companies Acts. Previously, as an Irish SE company, we were governed by the Irish Companies Acts and the SE Regulation, European Union Council Regulations and relevant European Union Directives. We also continue to operate under the regulatory requirements of numerous jurisdictions and organisations, including the ASX, ASIC, the NYSE, the SEC, the Irish Takeovers Panel and various other rulemaking bodies. See Section 3, “Memorandum and Articles of Association” for information regarding Irish Companies Acts and regulations to which we are subject.

Environmental Regulation

Our operations and properties are subject to extensive federal, state and local and foreign environmental protection and health and safety laws, regulations and ordinances. These environmental laws, among other matters, govern activities and operations that may have adverse environmental effects, such as discharges to air, soil and water, and establish standards for the handling of hazardous and toxic substances and the handling and disposal of solid and hazardous wastes. In the United States, these environmental laws include, but are not limited to the:

Table of Contents

as well as analogous state, regional and local regulations. Other countries also have statutory schemes relating to the protection of the environment.

Some environmental laws provide that a current or previous owner or operator of real property may be liable for the costs of removal or remediation of environmental contamination on, under, or in that property or other impacted properties. In addition, persons who arrange, or are deemed to have arranged, for the disposal or treatment of hazardous substances may also be liable for the costs of removal or remediation of environmental contamination at the disposal or treatment site, regardless of whether the affected site is owned or operated by such person. Environmental laws often impose liability whether or not the owner, operator or arranger knew of, or was responsible for, the presence of such environmental contamination. Also, third parties may make claims against owners or operators of properties for personal injuries, property damage and/or for clean-up associated with releases of hazardous or toxic substances pursuant to applicable environmental laws and common law tort theories, including strict liability.

Environmental compliance costs in the future will depend, in part, on continued oversight of operations, expansion of operations and manufacturing activities, regulatory developments and future requirements that cannot presently be predicted.

Table of Contents

Organisational Structure

JHI plc is incorporated and domiciled in Ireland.

The table below sets forth our significant subsidiaries, all of which are wholly-owned by JHI plc, either directly or indirectly, as of 31 May 2014.

Property, Plants and Equipment

We estimate that our manufacturing plants are among the largest and lowest cost fibre cement manufacturing plants in the United States. We believe that the location of our plants positions us near attractive markets in the United States while minimising our transportation costs for product distribution and raw material sourcing.

Our manufacturing plants use significant amounts of water which, after internal recycling and reuse, are eventually discharged to publicly owned treatment works. The discharge of process water is monitored by us, as well as by regulators. In addition, we are subject to regulations that govern the air emissions and other waste streams from our plants. In the past, from time to time, we have received notices of alleged discharges in excess of our water and air permit limits. In each case, and in compliance with our Environmental Policy, we have addressed the concerns raised in those notices, in part, through the payment of any associated minor fines and capital expenditures associated with preventing future discharges in excess of permitted levels.

Plants and Process

Fibre Cement Building Products

We manufacture fibre cement building products in the United States and Asia Pacific. Annual design capacity is based on management’s historical experience with our production process and is calculated assuming continuous operation, 24 hours per day, seven days per week, producing 5/16” medium

Table of Contents

density product at a targeted operating speed. Annual design capacity is not necessarily reflective of our actual capacity utilisation rates for our fibre cement plants by region. Annual capacity utilisation is affected by factors such as demand, product mix, batch size, plant availability and production speeds and is usually less than annual design capacity. We manufacture products of varying thicknesses and density.

We currently have an annual flat sheet design capacity of 3,226 mmsf and 520 mmsf in the United States and Asia Pacific, respectively, for our fibre cement building products. Fiscal year 2014 capacity utilisation, based on this annual design capacity, for our fibre cement building products locations was an average of 58% and 76% in the United States and Asia Pacific, respectively. As indicated above, annual flat sheet design capacity is based on management’s estimates. No accepted industry standard exists for the calculation of our fibre cement manufacturing facility design and utilisation capacities.

We are expanding production capacity in anticipation of the continued improvement of the operating environment and we expect to incur additional capital expenditures in fiscal year 2015 and beyond to meet anticipated demand increases in major markets. Those capacity expansion projects are as follows:

Fibre Reinforced Concrete Pipes

We manufacture fibre reinforced concrete pipes in Australia. Our current annual design capacity for our fibre reinforced concrete pipes plant is 50 thousand tons.

Plant Locations

The location of each of our fibre cement plants is set forth below:

Table of Contents

While the same basic process is used to manufacture fibre cement building products at each facility, plants are designed to produce the appropriate mix of products to meet each geographic market’s specific, projected needs. The facilities were constructed and are operated so production can be efficiently adjusted in response to increased consumer demand by increasing production capacity utilisation, enhancing the economies of scale or adding additional lines to existing facilities, or making corresponding reductions in production capacity in response to weaker demand.

Except for the Waxahachie, Texas location, we own all of our fibre cement manufacturing facilities located in the United States. The lease for the Waxahachie, Texas location expires on 31 March 2020, at which time we have an option to purchase the facility.

Two of our three Australian fibre cement manufacturing facilities (Rosehill, Sydney and Meeandah, Brisbane) are leased by us. The Rosehill lease expires on 23 March 2016, with an option to renew the lease for two further terms of 10 years expiring in March 2036. The Meeandah lease expires on 23 March 2019, and contains options to renew for two further terms of 10 years expiring in March 2039. As previously announced, in May 2013 we purchased the remaining Australian fibre cement manufacturing facility (Carole Park, Brisbane) as part of our Australian manufacturing capacity expansion. Our one New Zealand fibre cement manufacturing facility is leased by us. The lease for our New Zealand facility expires on 22 March 2016, at which time we have an option to renew the lease for two further terms of 10 years expiring in March 2036. There is no purchase option available under our leases related to our Australian and New Zealand facilities.

The land on which our Philippines fibre cement plant is located is owned by Ajempa Holding Inc. (“Ajempa”), a related party. Ajempa is 40% owned by our operating entity, James Hardie Philippines Inc., and 60% owned by the James Hardie Philippines Retirement Fund. The James Hardie operating entity owns 100% of the fixed assets on the land owned by Ajempa.

Table of Contents

Mines

We lease silica quartz mine sites in Tacoma, Washington, Reno, Nevada and Victorville, California. The lease for our quartz mine in Tacoma, Washington expires in February 2018 (with options to renew). The lease for our silica quartz mine site in Reno, Nevada expires in January 2019. The lease for our silica mine site in Victorville, California expires in June, 2015. Further, we own rights to an additional property in Victorville, California, however, as of 31 May 2013, we have not begun to mine this site.

As a mine operator, we are required by Section 1503(a) of the Dodd-Frank Wall Street Reform and Consumer Protection Act (the “Dodd-Frank Act”), and rules promulgated by the Securities and Exchange Commission implementing that section of the Dodd-Frank Act, to provide certain information concerning mine safety violations and other regulatory matters concerning the operation of our mines. During fiscal year 2014, we did not receive any notices, citations, orders, legal action or other communication from the US Department of Labor’s Mine Safety and Health Administration that would necessitate additional disclosure under Section 1503(a) of the Dodd-Frank Act.

Capital Expenditures

The following table sets forth our capital expenditures for each year in the three-year period ended 31 March 2014.

The Company did not have any material divestitures in the fiscal years ended 31 March 2014, 2013 and 2012.

The significant capital expenditure projects over the past three fiscal years in our USA and Europe Fibre Cement segment include:

Table of Contents

In our Asia Pacific Fibre Cement segment, significant capital expenditures in the last three fiscal years include:

In conjunction with the purchase of our Carole Park, Queensland location, the company is proceeding with a capital expenditure and commercial investment program to increase the plant’s production capacity at a total cost of approximately A$89.0 million over the next two fiscal years. Production facilities are projected to be fully operational in the first half of fiscal year 2016. We expect that this capital expenditure will allow us to service expected increases in demand for products and also enable incremental capacity expansions in the Asia Pacific Fibre Cement segment at low capital costs in the medium term, if required to meet future market demand. Production of building materials at our Rosehill plant in Sydney and of pipes at our Meeandah, Brisbane site will continue.

In our Research and Development segment, we purchased and fitted out a building for our new research and development facility in Naperville, Illinois for US$4.8 million in fiscal year 2013.

We currently expect to incur capital expenditures of approximately US$200.0 million per year over the next three fiscal years, including facility upgrades and expansions, equipment to enhance environmental compliance, and the implementation of new fibre cement technologies.

Table of Contents

JAMES HARDIE MANAGEMENT TEAM

Our management is overseen by the James Hardie Management Team (“JHMT”), whose members cover the key areas of fibre cement research and development, production, manufacturing, sales, human resources, investor relations, finance and legal.

Members of the JHMT as at 31 May 2014 (in alphabetical order) are:

Joe Blasko BSFS, JD

General Counsel

Age 47

Joe Blasko joined James Hardie as General Counsel in June 2011. Mr Blasko reports to the Company’s Chief Executive Officer (“CEO”).

Before joining James Hardie, Mr Blasko was Assistant General Counsel, and later, the General Counsel at Liebert Corporation, an Emerson Network Power Systems company and wholly-owned subsidiary of Emerson Electric Co. In his four years with Liebert/Emerson, Mr Blasko was responsible for establishing the legal department in Columbus, Ohio, managing and overseeing all legal matters and working closely with the executive management team. In this role, Mr Blasko also had global responsibilities which required expertise across multiple jurisdictions.

From 2004 to 2006, Mr Blasko was Associate General Counsel at The Scotts Miracle-Gro Company, serving as the effective “general counsel” to numerous corporate divisions within the organisation. From 1997 to 2004, Mr Blasko gained considerable regulatory and litigation expertise working at Vorys, Slater, Seymour and Pease LLP in Ohio.

Mr Blasko has a Juris Doctor from Case Western Reserve University in Cleveland, Ohio, USA and a Bachelor of Science in Foreign Service from Georgetown University, USA, with a specialty in International Relations, Law and Organisations.

Mark Fisher BSc, MBA

Executive General Manager – International

Age 43

Mark Fisher joined James Hardie in 1993 as a Production Engineer. Since then, he has worked for the Company as Finishing Manager, Production Manager and Product Manager at various locations; Sales and Marketing Manager; and as General Manager of our Europe Fibre Cement business. Mr Fisher was appointed Vice President – Specialty Products in November 2004, then Vice President – Research & Development in December 2005. In February 2008, his role was expanded to cover Engineering & Process Development.

In January 2010, he was appointed Executive General Manager – International, responsible for the Company’s non-US businesses in Australia, NZ, Philippines and Europe.

Mr Fisher has a Bachelor of Science in Mechanical Engineering and an MBA from University of Southern California, USA.

Table of Contents

Sean Gadd BEng, MBA

Executive General Manager – Northern Division

Age 41

Sean Gadd joined James Hardie in 2004 as a Regional Engineering Manager for the Asia Pacific business, and progressed to Plant Manager for both the Carole Park and Rosehill facilities in Australia. Mr Gadd then moved to the US in 2006 to take the role of Manufacturing Manager for Trim and various manufacturing facilities across the US.

In 2009 he ran the US trim business for James Hardie with responsibility for both Manufacturing and Sales, followed by a brief assignment leading Supply Chain. In 2011, Mr Gadd was promoted to the role of Vice President of Sales for the Western USA and Canada. Over the next year, his role was expanded to include the Midwest and Northeast of the USA.

Mr Gadd was appointed Executive General Manager in September 2013 with full P&L responsibility for the Northern Division.

Mr Gadd has a Bachelor of Engineering in Manufacturing Management and an executive MBA from the Australian Graduate School of Management, Australia.

Louis Gries BSc, MBA

Chief Executive Officer

Age 60

Louis Gries joined James Hardie as Manager of the Fontana fibre cement plant in California in February 1991 and was appointed President of James Hardie Building Products, Inc. in December 1993. Mr Gries became Executive Vice President – Operations in January 2003, responsible for operations, sales and marketing in our businesses in the Americas, Asia Pacific and Europe.

He was appointed Interim CEO in October 2004 and became CEO in February 2005.

In April 2012, the Company announced that effective June 2012, Mr Gries would again assume responsibility for managing the US business.

Before he joined James Hardie, Mr Gries worked for 13 years for USG Corp, including a variety of roles in research, plant quality and production, and product and plant management.

Mr Gries has a Bachelor of Science in Mathematics from the University of Illinois, USA and an MBA from California State University, Long Beach, USA.

Table of Contents

Matthew Marsh BA, MBA

Chief Financial Officer

Age 39

Matthew Marsh joined James Hardie as Chief Financial Officer (“CFO”) in June 2013. As CFO he oversees the company’s overall financial activities, including accounting, tax, treasury, performance and competitor analysis, internal audit and financial operations. Mr Marsh is also responsible for the company’s technology and information systems.

After a 16-year career at General Electric Company (“GE”), Mr Marsh brings a strong background in financial management. Before joining James Hardie, Mr Marsh most recently served as CFO of GE Healthcare’s IT business. Prior to being named CFO of GE Healthcare IT, Mr Marsh oversaw the finance operations for GE Healthcare’s U.S. Healthcare Systems and U.S. Diagnostic Imaging businesses.

Prior to those appointments Mr Marsh travelled globally with the GE Internal Audit Staff gaining extensive experience in several industries including appliances, information services, distribution and supply, aviation, plastics, financial services, capital markets and health care, across more than twenty countries. Mr Marsh has graduated from GE’s Financial Management Program (FMP).

Mr Marsh has a MBA from University of Chicago’s Booth School of Business, USA and a Bachelor of Arts in Economics and Public Affairs from Syracuse University, USA where he graduated Magna Cum Laude.

Sean O’Sullivan BA, MBA

Vice President – Investor & Media Relations

Age 48

Sean O’Sullivan joined James Hardie as Vice President – Investor & Media Relations in December 2008. For the eight years prior to joining James Hardie, Mr O’Sullivan was Head of Investor Relations at St. George Bank, where he established and led the investor relations function.

Mr O’Sullivan’s background includes thirteen years as a fund manager for GIO Asset Management, responsible for domestic and global investments. During this period, he spent time on secondment with a McKinsey and Co. taskforce that completed a major study into the Australian financial services industry. Mr O’Sullivan’s final position at GIO was General Manager of Diversified Investments where his responsibilities included determining the asset allocation for over A$10 billion in funds under management. After leaving GIO, Mr O’Sullivan worked for Westpac Banking Corporation in funds management sales.

Mr O’Sullivan has a Bachelor of Arts in Economics from Sydney University, Australia and an MBA from Macquarie Graduate School of Management, Australia.

Table of Contents

Ryan Sullivan BSc, MS, MBA

Executive General Manager – Southern Division

Age 40

Ryan Sullivan joined James Hardie in 2004 as the ColorPlus Manufacturing Manager. Since then, he has worked for the Company as Director of Global R&D and Engineering Services and Director of North America Supply Chain. In 2012, he became Director of the ColorPlus Business Unit, with product line responsibility for the North American ColorPlus business. In 2013, he was appointed to the James Hardie Management Team as Executive General Manager of the Southern Division with full P&L responsibility.

Before joining James Hardie, Mr Sullivan was a senior manager at Marconi Communications where he held numerous positions and had global responsibility. He has also worked in the fields of nuclear power and advanced robotics.

Mr Sullivan has a Bachelor of Science in Mechanical Engineering with a minor in Engineering Design from Carnegie Mellon University, USA, a Masters of Science in Electrical Engineering from the University of Pittsburgh, USA and an MBA from the University of Pittsburgh Katz School, USA.

Table of Contents

BOARD OF DIRECTORS

James Hardie’s directors have widespread experience, spanning general management, finance, law and accounting. Each director also brings valuable international experience that assists with James Hardie’s growth.

Michael Hammes BS, MBA

Age 72

Michael Hammes was elected as an independent Non-Executive Director of James Hardie in February 2007. He was appointed Chairman of the Board in January 2008 and is a member of the Audit Committee, the Remuneration Committee and the Nominating and Governance Committee.

Experience: Mr Hammes has extensive commercial experience at a senior executive level. He has held a number of executive positions in the medical products, hardware and home improvement, and automobile sectors, including CEO and Chairman of Sunrise Medical, Inc. (2000-2007), Chairman and CEO of Guide Corporation (1998-2000), Chairman and CEO of Coleman Company, Inc. (1993-1997), Vice Chairman of Black & Decker Corporation (1992-1993) and various senior executive roles with Chrysler Corporation (1986-1990) and Ford Motor Company (1979-1986).

Directorships of listed companies in the past five years: Current – Director of Navistar International Corporation (since 1996) and Director of DynaVox Mayer-Johnson (listed in April 2010).

Other: Resident of the United States.

Last elected: August 2011

Term expires: August 2014

Donald McGauchie AO

Age 64

Donald McGauchie joined James Hardie as an independent Non-Executive Director in August 2003 and was appointed Acting Deputy Chairman in February 2007 and Deputy Chairman in April 2007. He is Chairman of the Nominating and Governance Committee and a member of the Remuneration Committee.

Experience: Mr McGauchie has wide commercial experience within the food processing, commodity trading, finance and telecommunication sectors. He also has extensive public policy experience, having previously held several high-level advisory positions to the Australian Government.

Directorships of listed companies in the past five years: Current – Chairman (since 2010) and Director (since 2010) of Australian Agricultural Company Limited; Chairman (since 2010) and Director (since 2003) of Nufarm Limited; Director of GrainCorp Limited (since 2009). Former – Chairman of Telstra Corporation Limited (2004-2009).

Other: Chairman of Australian Wool Testing Authority (since 2005) and Director since 1999; Former Director of The Reserve Bank of Australia (2001-2011); resident of Australia.

Table of Contents

Last elected: August 2013

Term expires: August 2016

Brian Anderson BS, MBA, CPA