Table of Contents

Exhibit 99.4

James Hardie Industries plc

Irish Statutory Accounts

For the Year Ended 31 March 2016

Table of Contents

James Hardie Industries plc

Directors’ Report and

Consolidated Financial Statements

For the Year Ended 31 March 2016

Table of Contents

James Hardie Industries plc

Table of Contents

Table of Contents

James Hardie Industries plc

Reading this Report

These Irish Statutory Accounts contain a Directors’ Report and audited consolidated financial statements and accompanying footnote disclosures prepared in accordance with accounting principles generally accepted in the United States of America (“US GAAP”), modified to comply with specific provisions of Irish Company Law for the consolidated entity consisting of James Hardie Industries plc and its direct and indirect wholly-owned subsidiaries and special purpose entity, (collectively referred to as “the Company”). In addition, these Irish Statutory Accounts include the James Hardie Industries plc Company Balance Sheet and related footnotes prepared on the going concern basis under the historical cost convention in accordance with the Companies Act 2014 and Financial Reporting Standard 101 Reduced Disclosure Framework (“FRS 101”).

For the year ended 31 March 2016, the Company has included, as an Appendix to the Directors’ Report, its fiscal year 2016 US and Australian Annual Report (“FY2016 Annual Report”). This report has been filed with the US Securities and Exchange Commission (“SEC”) and, except for the exhibits to the FY2016 Annual Report, is included in its entirety as an Appendix to the Directors’ Report. These exhibits can be obtained by accessing the Company’s FY2016 Annual Report on Form 20-F on the SEC’s website at www.sec.gov and on the Investor Relations area of the Company’s website at www.jameshardie.com.au. Disclosures in the Directors’ Report and consolidated financial statements that are duplicative to the FY2016 Annual Report have been cross-referenced to the relevant section(s) in the FY2016 Annual Report.

The Independent Auditor’s Report included on pages 7-8 refers solely to the financial statements included in the Irish Statutory Accounts. The Report of Independent Registered Public Accounting Firm included in the FY2016 Annual Report (Appendix to the Directors’ Report) refers solely to the financial statements in the FY2016 Annual Report which were prepared under US GAAP. As such, readers should not rely on the Report of Independent Registered Public Accounting Firm included in the FY2016 Annual Report as it does not relate to the financial statements included in the Irish Statutory Accounts.

Table of Contents

James Hardie Industries plc

Directors’ Report

For the year ended 31 March 2016

The directors present their report and audited consolidated financial statements for the fiscal year ended 31 March 2016 on the consolidated entity of James Hardie Industries plc (“JHI plc”) and its wholly-owned subsidiaries and a special purpose entity. Unless the context indicates otherwise, JHI plc and its direct and indirect wholly-owned subsidiaries and special purpose entity (as of the time relevant to the applicable reference) are collectively referred to as “James Hardie”, the “James Hardie Group” or the “Company”.

The directors have elected to prepare the consolidated financial statements in accordance with Section 279 of the Companies Act 2014, which provides that a true and fair view of the assets and liabilities, financial position and profit or loss may be given by preparing the financial statements in accordance with accounting principles generally accepted in the United States of America (“US GAAP”), as defined in Section 279(1) of the Companies Act 2014, to the extent that the use of those principles in the preparation of the financial statements does not contravene any provision of the Companies Act 2014 or of any regulations made thereunder.

Principal Activities

See “Information on the Company – Business Overview – General Overview of our Business” in Section 1 of the Appendix to this Directors’ Report.

Review of the Development and Performance of the Business

Trends and Economic Events

See “Management’s Discussion and Analysis – Outlook and Trend Information” in Section 2 of the Appendix to this Directors’ Report.

Operating Results

See “Management’s Discussion and Analysis – Operating Results” in Section 2 of the Appendix to this Directors’ Report.

In addition, refer to Note 1 of the consolidated financial statements in relation to the differences arising between the Irish Statutory Accounts and the Appendix to the Directors’ Report for the years ended 31 March 2016 and 2015.

Liquidity and Capital Allocation

See “Management’s Discussion and Analysis – Liquidity and Capital Allocation” subsections “Overview,” “Sources of liquidity,” “Cash Flow – Year Ended 31 March 2016,” “Borrowings,” “Capital Expenditures,” “Capital Management and Dividends” and “Management’s Discussion and Analysis – Contractual Obligations” in Section 2 of the Appendix to this Directors’ Report.

In addition, refer to Note 1 of the consolidated financial statements in relation to the differences arising between the Irish Statutory Accounts and the Appendix to the Directors’ Report for the years ended 31 March 2016 and 2015.

Principal Risks and Uncertainties

See “Risk Factors” in Section 3 of the Appendix to this Directors’ Report.

Table of Contents

James Hardie Industries plc

Directors’ Report (continued)

For the year ended 31 March 2016

Legal Proceedings

See “Legal Proceedings” in Section 3 of the Appendix to this Directors’ Report.

Financial Instruments

See Financial Instruments in Note 2 to the US GAAP consolidated financial statements in Section 2 of the Appendix to this Directors’ Report and “Quantitative and Qualitative Disclosures About Market Risk” in Section 3 of the Appendix to this Directors’ Report.

Research and Development

See “Information on the Company - Business Overview - Dependence on Trade Secrets and Research and Development (“R&D”)” in Section 1 of the Appendix to this Directors’ Report.

Capital Management and Dividends

See Note 17 to the US GAAP consolidated financial statements in Section 2 of the Appendix to this Directors’ Report and “Management’s Discussion Analysis – Liquidity and Capital Allocation – Capital Management and Dividends” in Section 2 of the Appendix to this Directors’ Report.

In addition, refer to Note 1 of the Irish Statutory Accounts in relation to the differences arising between the Irish Statutory Accounts and the Appendix to the Directors’ Report as it related to the 125 year anniversary special dividend paid during the year ended 31 March 2015.

Results for the Year and Proposed Transfer to Reserves

The results for the year are set out in the consolidated statements of operations and comprehensive income on page 9. The balance to be transferred to reserves is US$244.4 million.

Future Developments

See “Management’s Discussion and Analysis – Outlook and Trend Information” in Section 2 of the Appendix to this Directors’ Report.

Accounting Records

The measures taken by the directors to ensure compliance with the Company’s obligations under Section 281 to 285 of the Companies Act 2014 to keep proper books of account are the implementation of necessary policies and procedures for recording transactions, the employment of competent accounting personnel with appropriate expertise and the provision of adequate resources to the financial function.

The books of account are maintained at the Company’s registered office at Second Floor, Europa House, Harcourt Centre, Harcourt Street, Dublin 2.

See “Memorandum and Articles of Association – Key Provisions of Our Constitution” – Company Books of Accounts” in Section 3 of the Appendix to this Directors’ Report.

Table of Contents

James Hardie Industries plc

Directors’ Report (continued)

For the year ended 31 March 2016

Important Events Since Year End

On 19 May 2016, the Company announced an ordinary dividend of US29.0 cents per security with a record date of 9 June 2016 and payment date of 5 August 2016. The Company also announced a new share buyback program (the “fiscal 2017 program”) to acquire up to US$100.0 million of its issued capital in the twelve months through May 2017.

Directors of the Company

See “Board of Directors” in Section 1 of the Appendix to this Directors’ Report for a list of the Company’s directors along with their biographies. The directors listed served on the Board throughout fiscal year 2016.

Disclosure of Information to Auditors

The directors who held office at the date of approval of this Directors’ Report confirm that so far as they are each aware, there is no relevant audit information of which the Company’s auditors are unaware and each director has taken all steps that they ought to have taken as a director to make themselves aware of any relevant audit information and to establish that the Company’s auditors are aware of that information.

Going Concern

The business activities, together with the factors likely to affect its future development, its financial position, financial risk management objectives, details of its financial instruments and derivative activities, and its exposures to price, credit, liquidity and cash flow risk of James Hardie Industries plc and its wholly-owned subsidiaries and special purpose entity (collectively, the “Company” or the “Group”), are set out in Section 3 of the Appendix to this Directors’ Report. The Group has considerable financial resources together with long-term contracts with a number of customers and suppliers across different geographic areas and industries. As a consequence, the directors believe that the Group is well placed to manage its business risks successfully despite the current uncertain economic outlook. After making enquiries, the directors have a reasonable expectation that the Group has adequate resources to continue in operational existence for the foreseeable future. Accordingly, they continue to adopt the going concern basis in preparing the annual report and accounts.

James Hardie Industries plc (“JHI plc” or the “Parent Company”) was in a net current liability position of US$4.0 million and a net current asset position of US$23.2 million at 31 March 2016 and 2015, respectively. The Parent Company has minimal liabilities other than amounts owed to the Group. These undertakings will not be repaid until all other debts are satisfied. In addition, the Group has US$199.5 million of available unused inter-group loan facilities. The directors are satisfied that the Parent Company will continue to generate adequate cash to meet all its obligations as they fall due. On this basis, and after making inquiries, the directors have reasonable expectations that the Parent Company has adequate resources to continue in operational existence for the foreseeable future. Accordingly, the Parent Company continues to adopt the going concern assumption in preparing the financial statements. These financial statements do not include any adjustments to the carrying amount or classification of assets and liabilities that would result if the Parent Company were unable to continue as a going concern.

Table of Contents

James Hardie Industries plc

Directors’ Report (continued)

For the year ended 31 March 2016

Directors’ and Secretary’s Interests

No director, the Company Secretary nor any member of their immediate family had any interest in shares or debentures of any subsidiary. The interests of the executive director (Mr Louis Gries) and non-executive directors in the ordinary share capital of the Company at the beginning (or date of appointment if later) and end of fiscal year 2016 are set out in “Remuneration – Share Ownership and Stock Based Compensation Arrangements” in Section 1 of the Appendix to this Directors’ Report. The non-executive directors had no options or restricted stock units at the beginning and end of fiscal year 2016 except for Russell Chenu, who held nil and 91,767 restricted stock units (“RSUs”) at 31 March 2016 and 31 March 2015, respectively.

The interests of Ms Mercer, the Company Secretary, in the ordinary share capital of the Company was 110 shares, nil options and 4,871 RSUs at 31 March 2016 and 110 shares, nil options and 3,042 RSUs at 31 March 2015.

Political Donations

No political contributions that require disclosure under Irish law were made during fiscal year 2016.

Subsidiary Companies

Information regarding subsidiary undertakings is provided in Note 30 to the consolidated financial statements.

Branches

As of 31 March 2016, the Company does not operate any branches outside of Ireland.

Annual General Meeting

The Annual General Meeting of the Company will be held on 11 August 2016 at James Hardie’s Corporate Headquarters in Dublin, Ireland.

Auditors

The auditors Ernst & Young, Chartered Accountants are willing to continue in office and a resolution authorising the directors to fix their remuneration will be submitted at the Annual General Meeting.

On behalf of the Directors

Table of Contents

James Hardie Industries plc

Directors’ Responsibilities Statement

Company law in the Republic of Ireland requires the directors to prepare financial statements for each financial year which give a true and fair view of the state of the assets, liabilities and financial position of James Hardie Industries plc (“JHI plc” or the “Parent Company”) and of JHI plc and its wholly-owned subsidiaries and special purpose entity (collectively, the “Company” or the “Group”) and of the profit or loss of the Group for that period.

In preparing the financial statements of the Group, the directors are required to:

The considerations set out above for the Group are also required to be addressed by the directors in preparing the financial statements of the Parent Company (which are set out on pages 29 to 42), in respect of which the applicable accounting standards are those which are generally accepted in the Republic of Ireland.

The directors have elected to prepare the Parent Company’s financial statements in accordance with Financial Reporting Standard 101 ‘Reduced Disclosure Framework’ (“FRS 101”) as issued by the Financial Reporting Council and promulgated by the Institute of Chartered Accountants in Ireland, together with the Companies Act 2014.

Under Irish Company Law, the directors must not approve the financial statements unless they are satisfied that they give a true and fair view of the assets, liabilities and financial position of the Group and Parent Company as at the end of the financial year, and the profit or loss of the Group for the financial year, and otherwise comply with the Companies Act 2014.

The directors are responsible for keeping proper accounting records which disclose with reasonable accuracy the assets, liabilities, financial position and profit and loss of the Parent Company and which enable them to ensure that the financial statements of the Group are prepared in accordance with US GAAP and comply with the provisions of the Companies Act 2014. They are also responsible for safeguarding the assets of the Group and hence for taking reasonable steps for the prevention and detection of fraud and other irregularities.

Table of Contents

Appendix to the

Directors’ Report

FY 2016 US and Australian

Annual Report

(This document is an appendix to, and constitutes an integral part of, the Directors’ Report.)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 20-F

(Mark One)

¨  REGISTRATION STATEMENT PURSUANT TO SECTION 12(b) OR (g) OF THE SECURITIES EXCHANGE ACT OF 1934

OR

x   ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended 31 March 2016

OR

¨  TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

OR

¨  SHELL COMPANY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Date of event requiring this shell company report

For the transition period from       to

Commission file number 1-15240

JAMES HARDIE INDUSTRIES plc

(Exact name of Registrant as specified in its charter)

N/A

(Translation of Registrant’s name into English)

Ireland

(Jurisdiction of incorporation or organization)

Europa House, Second Floor

Harcourt Centre

Harcourt Street, Dublin 2, Ireland

(Address of principal executive offices)

Natasha Mercer

Corporate Secretary

(Contact name)

353 1411 6924 (Telephone)                 353 1479 1128 (Facsimile)

Securities registered or to be registered pursuant to Section 12(b) of the Act:

Table of Contents

Securities registered or to be registered pursuant to Section 12(g) of the Act.

None

Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act.

None

Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered by the Annual Report:

445,579,351 shares of common stock at 31 March 2016

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  x  Yes  ¨  No

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.  ¨  Yes  x  No

Note — Checking the box will not relieve any registrant required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 from their obligations under those Sections.

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days.  x  Yes  ¨  No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  x  Yes  ¨  No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See the definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing:

International Financial Reporting Standards as issued by the International Accounting

If “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has elected to follow:

¨  Item 17  ¨  Item 18

If this is an Annual Report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

¨  Yes  x  No

Table of Contents

2016

ANNUAL REPORT

ON FORM 20-F

Table of Contents

TABLE OF CONTENTS

Table of Contents

FORM 20-F CROSS REFERENCE

Table of Contents

FORM 20-F CROSS REFERENCE (continued)

Table of Contents

SECTION 1

INTRODUCTION

James Hardie Industries plc is a world leader in the manufacture of fiber cement siding and backerboard. Our products are used in a number of markets, including new residential construction (single and multi-family housing), manufactured housing, repair and remodeling and a variety of commercial and industrial applications. We manufacture numerous types of fiber cement products with a variety of patterned profiles and surface finishes for a range of applications, including external siding and trim and soffit lining, internal linings, facades and floor and tile underlay. Our current primary geographic markets include the United States of America (“US”, “USA” or the “United States”), Canada, Australia, New Zealand, the Philippines and Europe.

James Hardie Industries plc is a “public limited company,” incorporated and existing under the laws of Ireland. Except as the context otherwise may require, references in this Annual Report on Form 20-F (this “Annual Report”) to “James Hardie,” the “James Hardie Group,” the “Company,” “JHI plc,” “we,” “our” or “us” refer to James Hardie Industries plc, together with its direct and indirect wholly owned subsidiaries as of the time relevant to the applicable reference.

For certain information about the basis of preparing the financial information in this Annual Report, see “Section 2 – Reading this Report.” In addition, this Annual Report contains statements that constitute “forward-looking statements.” For an explanation of forward-looking statements and the risks, uncertainties and assumptions to which they are subject, see “Section 2 – Reading this Report.” Further, a “Glossary of Abbreviations and Definitions” has also been included under Section 4 of this Annual Report.

The term “fiscal year” refers to our fiscal year ended 31 March of such year; the term “dollars,” “US$” or “$” refers to US dollars; and the term “A$” refers to Australian dollars. For the exchange rates used to convert Australian dollar denominated amounts into US dollars, see Note 2 to our consolidated financial statements in Section 2.

Information contained in or accessible through the websites mentioned in this Annual Report does not form a part of this Annual Report unless we specifically state that it is incorporated by reference herein. All references in this Annual Report to websites are inactive textual references and are for information only.

SELECTED FINANCIAL DATA

We have included in this Annual Report the audited consolidated financial statements of the Company, consisting of our consolidated balance sheets as of 31 March 2016 and 2015, and our consolidated statements of operations and comprehensive income, cash flows for each of the years ended 31 March 2016, 2015 and 2014 and changes in shareholders’ (deficit) equity, together with the related notes thereto. The consolidated financial statements included in this Annual Report have been prepared in accordance with accounting principles generally accepted in the US (“US GAAP”).

Table of Contents

The selected consolidated financial information, summarized below for the five most recent fiscal years has been derived in part from the Company’s consolidated financial statements. You should read the selected consolidated financial information in conjunction with the Company’s consolidated financial statements and related notes contained in “Section 2 – Consolidated Financial Statements” and with the information provided in “Section 2 – Management’s Discussion and Analysis.” Historic financial data is not necessarily indicative of our future results and you should not unduly rely on it.

Table of Contents

INFORMATION ON THE COMPANY

History and Development of the Company

James Hardie was established in 1888 as an import business, listing on the Australian Securities Exchange (“ASX”) in 1951 to become a publicly owned company in Australia. After becoming a listed company, we built a diverse portfolio of building and industrial products. In the late-1970s, we pioneered the development of asbestos-free fiber cement technology and in the early-1980’s began designing and manufacturing a wide range of fiber cement building products that made use of the benefits that came from the products’ durability, versatility and strength. Using the technical and manufacturing expertise developed in Australia, we expanded into the United States, opening our first fiber cement plant in Fontana, California in February 1990.

In September 2001, in order to maximize the benefit of our strong international growth and in order to generate higher returns for shareholders from the James Hardie Group’s continuing international expansion, the shareholders of James Hardie Industries Limited (“JHIL”), then the ultimate parent company of the James Hardie Group and the vehicle with which our shareholding was listed with the ASX, agreed to exchange their shares for shares in James Hardie Industries N.V. (“JHINV”), a Dutch public limited liability company. JHINV retained its primary listing on the ASX, and in October 2001, to reflect the new corporate structure, JHIL transferred all of its fiber cement businesses to JHINV.

Table of Contents

In February 2010, our legal name was changed to James Hardie Industries SE when our legal form was converted from a Dutch public limited liability company to a Societas Europaea (“SE”), a European public limited liability company. This was the first stage of a two-stage re-domicile proposal to change our registered corporate domicile from the Netherlands to Ireland. On 17 June 2010, we implemented Stage 2 of the re-domicile and changed our registered corporate domicile to Ireland to become an Irish SE, becoming an Irish tax resident on 29 June 2010. On 15 October 2012, we converted from an Irish SE into our current corporate form, an Irish public limited company (“plc”).

We conduct our operations under legislation in various jurisdictions. As an Irish plc, we are governed by the Irish Companies Act 2014 and we operate under the regulatory requirements of numerous jurisdictions and organizations, including the ASX, ASIC, the New York Stock Exchange (“NYSE”), the United States Securities and Exchange Commission (“SEC”), the Irish Takeover Panel and various other rulemaking bodies.

The address of our registered office in Ireland is Europa House, Second Floor, Harcourt Centre, Harcourt Street, Dublin 2, Ireland. The telephone number there is +353 1411 6924. Our agent in the United States is CT Corporation. Its office is located at 111 Eight Avenue – 13^th Floor, New York, New York 10011. The address of our registered office in Australia is Level 3, 22 Pitt Street, Sydney NSW 2000 and the telephone number there is +61 2 8845 3360. Our share registry is maintained by Computershare Registry Services Pty Ltd. All enquires and correspondence regarding holdings should be directed to: Computershare Investor Services Pty Ltd, Level 5, 115 Grenfell Street, Adelaide, SA 5000; telephone: +61 3 9415 4000, toll free within Australia: 1 300 855 080 or toll free from the US 1 855 298 3404.

Our Agreement with Asbestos Injuries Compensation Fund

Prior to 1987, ABN 60 Pty Limited (formerly JHIL) (“ABN 60”) and two of its former subsidiaries, Amaca Pty Limited (“Amaca”) and Amaba Pty Limited (“Amaba”) (together the “Former James Hardie Companies”), manufactured products in Australia that contained asbestos. These products have resulted in liabilities for the Former James Hardie Companies in Australia.

In February 2007, our shareholders approved the Amended and Restated Final Funding Agreement (“AFFA”) entered into on 21 November 2006 to provide long-term funding to AICF for the compensation of proven Australian-related personal injuries for which the Former James Hardie Companies are found liable. AICF, an independent trust, subsequently assumed ownership of the Former James Hardie Companies. We do not own AICF, however, we are entitled to appoint three directors, including the Chairman and the New South Wales (“NSW”) Government is entitled to appoint two directors.

Under the terms of the AFFA, subject to the operation of an annual cash flow cap, James Hardie 117 Pty Ltd (the “Performing Subsidiary”) will make annual payments to AICF. The amount of these annual payments is dependent on several factors, including our free cash flow (as defined in the AFFA), actuarial estimations, actual claims paid, operating expenses of AICF, changes in the AUD/USD exchange rate and the annual cash flow cap. JHI plc owns 100% of the Performing Subsidiary and guarantees the Performing Subsidiary’s obligation. As a result, for US GAAP purposes, we consider JHI plc to be the primary beneficiary of AICF.

Table of Contents

Although we have no legal ownership in AICF, for financial reporting purposes, our interest in AICF is considered variable and we consolidate AICF due to our pecuniary and contractual interests in AICF as a result of the funding arrangements outlined in the AFFA. For additional information on our consolidation of AICF and asbestos-related assets and liabilities, see Note 2 to our consolidated financial statements.

Corporate Structure

The following diagram summarizes our current corporate structure:

Business Overview

General Overview of Our Business

Based on net sales, we believe we are the largest manufacturer of fiber cement products and systems for internal and external building construction applications in the United States, Australia, New Zealand, and the Philippines. We market our fiber cement products and systems under various Hardie brand names, such as HardiePlank^®, HardiePanel^®, HardieTrim^® and HardieBacker^® boards, and other brand names such as Artisan^® by James Hardie, Cemplank^®, Scyon^® and HardieLinea^®.

The breakdown of our net sales by operating segment for each of our last three fiscal years is as follows:

Table of Contents

Products

We manufacture a wide-range of fiber cement building materials for both internal and external use across a broad range of applications, including: external siding, internal walls, floors, ceilings, soffits, trim, fencing and facades. While there are some market specific products, our core product ranges, being planks, which are used for external siding and flat sheets, are used for internal and external wall linings and floor underlayments and are sold across all of the markets in which we operate.

Products Used in External Applications

We developed a proprietary technology platform that enables us to produce thicker yet lighter-weight fiber cement products that are generally easier to handle than most traditional building products. Further, we believe that our products provide certain performance, design and cost advantages, while offering comparable aesthetics to competing products such as wood and vinyl siding.

Performance and design advantages:

We believe the benefits associated with our fiber cement products have enabled us to gain a competitive advantage over competing products.

Products Used in Internal Applications

Compared to natural and engineered wood and wood-based products, we believe our product range for internal applications provide the same general advantages provided by our products for external applications. In addition, our fiber cement products for internal applications exhibit less movement in response to exposure to moisture and impact damage than many competing products, providing a more consistent and durable substrate on which to install tiles. Further, we believe our ceramic tile underlayment products exhibit better handling and installation characteristics compared to fiberglass mesh cement boards.

Significant New Products

In the United States, new products released over the last three years include HardieReveal2.0™ panel system, James Hardie^® Insulated Lap Siding and Trim, HardieTrim^® 2x™ board,

Table of Contents

HardieTrim^® NT3^® Roughsawn board, HardieTrim^® Mouldings, Artisan^® V-Rustic premium exterior siding, custom colors using our ColorPlus^® Technology, and an improved touch-up accessory to support ColorPlus^® products.

In Australia and New Zealand, new products released over the last three years include the ARChitectural™ Prefinished panel range for commercial applications, including Invibe^® panels with Chromashield^® Technology and Inraw^® panels. Extensions to the existing Stria^® cladding products have been launched to provide Stria^® Standard 325mm, Stria^® Wide 405mm, and Splayed 255mm cladding profiles. Similarly, Axon^® cladding has now been extended to provide Axon^® Smooth 133mm, Axon^® Smooth 400mm, and Axon^® Grained 133mm cladding.

In Australia only, our HardieDeck™ system provided a major new product application launch in 2015. HardieBrace^®, a new online calculator tool, offers a way to simplify structural bracing calculations. Modcem^® modular flooring has provided an entry into commercial flooring applications. Similarly, Systemboard™ cladding provided a niche multi-story construction product application. Additions to the range of building science offerings include HardieWrap^® weather barrier, HardieFire^® Insulation, HardieBreak^® Thermal Strip, as well as the HardieSmart^® Boundary, Aged Care and ZeroLot Wall Systems. Due to an evolution of the market in Australia, the Scyon^® range of products has been repositioned under the James Hardie brand as James Hardie^® products including Scyon^® technology.

In New Zealand only, over the same timeframe, Secura^® Interior Flooring, Secura^® Exterior Flooring, Axent™ Fascia, HomeRAB^® 4.5mm Pre Cladding, HardieGlaze^®, Stria^® Cladding, Axon^® 400 and 133 Grained Cladding, Linea^® Oblique™ Cladding and Easy Lap™ Panel have been launched.

In the Philippines, new products released over the past three years include the extension of the established Hardieflex™ board range with the inclusion of Hardieflex™ Wet Area Walls lining and Hardieflex™ Pro products, primarily for wet area application, and HardieFlex^® Flooring.

The European business has launched HardieFloor™ Structural Flooring, and has developed an innovative range of products focused on improving acoustic performance of buildings, including HardieFloor dB™ Structural Acoustic Flooring, and HardieQStrip™ Acoustic Batten.

Principal Markets for Our Products

United States, Canada and Europe

In the US and Canada, the largest application for fiber cement building products is in external siding for the residential building industry. The external siding market includes various cladding types, including fiber cement, vinyl, natural wood, engineered wood, brick, stucco and stone. Based on industry estimates, vinyl has the largest share of the US and Canadian siding markets. External siding typically occupies a significant square footage component of the outside of every building. Selection of siding material is based on installed cost, durability, aesthetic appeal, strength, weather resistance, maintenance requirements and cost, insulating properties and other features. Different regions of the US and Canada show a preference amongst siding materials according to economic conditions, weather, materials availability and local preference.

Table of Contents

Demand for siding in the US and Canada fluctuates based on the level of new residential housing starts and the repair and remodeling activity of existing homes. The level of activity is generally a function of interest rates and the availability of financing to homeowners to purchase a new home or make improvements to their existing homes, inflation, household income and wage growth, unemployment levels, demographic trends, gross domestic product growth and consumer confidence. The sale of fiber cement products in the North America accounts for the largest portion of our net sales, accounting for 78%, 75% and 73% of our total net sales in fiscal years 2016, 2015 and 2014, respectively.

In the US and Canada, competition in the external siding market comes primarily from substitute products, such as natural or engineered wood, vinyl, stucco and brick. We believe we can continue to increase our market share from these competing products through targeted marketing programs designed to educate customers on our brand and the performance, design and cost advantages of our products.

In Europe, fiber cement building products are used in both residential and commercial building applications in external siding, internal walls, floors, soffits and roofing. We compete in most segments, except roofing, and promote the use of fiber cement products against traditional masonry, gypsum-based products and wood-based products. Since we commenced selling our products in Europe in fiscal year 2004, we have continued to work to grow demand for our products by building awareness among distributors, builders and contractors. Management believes that the growth outlook for fiber cement in Europe is favorable, in light of stricter insulation requirements driving demand for advanced exterior cladding systems, as well as better building practices increasing the use of fiber cement in interior applications.

Asia Pacific

In the Asia Pacific region, we principally sell into the Australian, New Zealand and Philippines markets, with the residential building industry representing the principal market for fiber cement products. The largest applications of fiber cement across our three primary markets are in external siding, internal walls, ceilings, floors, soffits, fences and facades. We believe the level of activity in this industry is generally a function of interest rates, inflation, household income and wage growth, unemployment levels, demographic trends, gross domestic product growth and consumer confidence. Demand for fiber cement building products is also affected by the level of new housing starts and renovation activity.

In Australia, competition for fiber cement has intensified over the past decade, with two competitors establishing fiber cement manufacturing facilities and competition from imports continuing to grow. Additionally, we continue to see competition from natural and engineered wood, wallboard, masonry and brick products.

In New Zealand, we continue to see competition intensifying as fiber cement imports have become more cost competitive and overseas manufacturers look to supplement their primary operating environments with additional markets.

In the Philippines, we have seen fiber cement gain acceptance across a broader range of product applications in the last decade, leading to additional fiber cement products entering the market,

Table of Contents

along with the increased use of gypsum in fiber cement applications. We see fiber cement having long-term growth potential not only in the Philippines, but across Asia and the Middle East, as the benefits of its light-weight and durability become more widely recognized.

Seasonality

Our businesses are seasonal and typically follow activity levels in the building and construction industry. In the United States, the calendar quarters ending in December and March generally reflect reduced levels of building activity depending on weather conditions. In Australia and New Zealand, the calendar quarter ending in March is usually the quarter most affected by a slowdown due to summer holidays. In the Philippines, construction activity diminishes during the wet season from June through September and during the last half of December due to the slowdown in business activity over the holiday period. Also, general industry patterns can be affected by weather, economic conditions, industrial disputes and other factors. See “Section 3 – Risk Factors.”

Raw Materials

The principal raw materials used in the manufacture of our fiber cement products are cellulose fiber (wood-based pulp), silica (sand), Portland cement and water. We have established supplier relationships for all of our raw materials across the various markets in which we operate and we do not anticipate having difficulty in obtaining our required raw materials from these suppliers. The purchase price of these raw materials and other materials can fluctuate depending on the supply-demand situation at any given point in time.

We work hard to reduce the effect of both price fluctuations and supply interruptions by entering into contracts with qualified suppliers and through continuous internal improvements in both our products and manufacturing processes.

Cellulose Fiber

Reliable access to specialized, consistent quality, low cost pulp is critical to the production of fiber cement building materials. As a result of our many years of experience and expertise in the industry, we share our internal expertise with pulp producers in New Zealand, the United States, Canada and Chile to ensure they are able to provide us with a highly specialized and proprietary formula crucial to the reinforcing cement matrix of our fiber cement products. We have confidentiality agreements with our pulp producers and we have obtained patents in the United States and in certain other countries covering certain unique aspects of our pulping formulas and processes that we believe cannot adequately be protected through confidentiality agreements. However, we cannot be assured that our intellectual property and other proprietary information will be protected in all cases. See “Section 3 – Risk Factors.”

Silica

High purity silica is sourced locally by the various production plants. In the majority of locations, we use silica sand as a silica source. In certain other locations, however, we process quartz rock and beneficiate silica sand to ensure the quality and consistency of this key raw material.

Table of Contents

Cement

Cement is acquired in bulk from local suppliers. We continue to evaluate options on agreements with suppliers for the purchase of cement that can lock in our cement prices over longer periods of time.

Water

We use local water supplies and seek to process all wastewater to comply with environmental requirements.

Sales, Marketing and Distribution

The principal markets for our fiber cement products are the United States, Australia, New Zealand, the Philippines, Canada, and in parts of Europe, including the United Kingdom and France. In addition, we have sold fiber cement products in many other markets, including China, Mongolia, Denmark, Germany, Hong Kong, India, the Middle East (Israel, Saudi Arabia, Lebanon and the United Arab Emirates), various Pacific Islands, Singapore, South Korea, Taiwan, and Vietnam. Our brand name, customer education in comparative product advantages, differentiated product range and customer service, including technical advice and assistance, provide the basis for our marketing strategy.

We offer our customers support through a specialized fiber cement sales force and customer service infrastructure in the United States, Australia, New Zealand, the Philippines and Europe. The customer service infrastructure includes inbound customer service support coordinated nationally in each country, and is complemented by outbound telemarketing capability. Within each regional market, we provide sales and marketing support to building products dealers and lumber yards and also provide support directly to the customers of these distribution channels, principally homebuilders and building contractors.

We maintain dedicated regional sales management teams in our major sales territories, with our national sales managers and national account managers, together with regional sales managers and sales representatives, maintaining relationships with national and other major accounts. Our various sales forces, which in some instances manage specific product categories, include skilled trades people who provide on-site technical advice and assistance.

In the United States, we sell fiber cement products for new residential construction predominantly to distributors, which then sell these products to dealers or lumber yards. This two-step distribution process is supplemented with direct sales to dealers and lumber yards as a means of accelerating product penetration and sales. Repair and remodel products in the United States are typically sold through the large home center retailers and specialist distributors. Our products are distributed across the United States and Canada primarily by road and, to a lesser extent, by rail.

In Australia and New Zealand, both new construction and repair and remodel products are generally sold directly to distributor/hardware stores and lumber yards rather than through the two-step distribution process. In the Philippines, a network of thousands of small to medium size dealer outlets sell our fiber cement products to consumers, builders and real estate developers,

Table of Contents

although in recent years, do-it-yourself type stores have started to enter the Philippines market. The physical distribution of our product in each country is primarily by road or sea transport. Products manufactured in Australia, New Zealand and the Philippines are also exported to a number of markets in Asia, various Pacific Islands, and the Middle East by sea transport.

Despite the fact that distributors and dealers are generally our direct customers, we also aim to increase primary demand for our products by marketing our products directly to homeowners, architects and builders. We encourage them to specify and install our products because of the quality and craftsmanship of our products. This “pull through” strategy, in turn, assists us in expanding sales for our distribution network as distributors benefit from the increasing demand for our products.

Geographic expansion of our fiber cement business has occurred in markets where framed construction is prevalent for residential applications or where there are opportunities to change building practices from masonry to framed construction. Expansion is also possible where there are direct substitution opportunities irrespective of the methods of construction. Our entry into the Philippines is an example of the ability to substitute fiber cement for an alternative product (in this case plywood). With the exception of our current major markets, as well as Japan and certain rural areas in Asia, Scandinavia, and Eastern Europe, most markets in the world principally utilize masonry construction for external walls in residential construction. Accordingly, further geographic expansion depends substantially on our ability to provide alternative construction solutions and for those solutions to be accepted in those markets.

Dependence on Trade Secrets and Research and Development (“R&D”)

We pioneered the successful development of cellulose reinforced fiber cement and, since the early-1980s, have progressively introduced products developed as a result of our proprietary product formulation and process technology. The introduction of differentiated products is one of the core components of our global business strategy. This product differentiation strategy is supported by our significant investment in research and development activities.

We view spending on research and development as the key to sustaining our existing product leadership position, by providing a continuous pipeline of innovative new products and technologies with sustainable performance and design advantages over our competitors. Further, through our investments in new process technology or by modifying existing process technology, we aim to keep reducing our capital and operating costs and to find new ways to make existing and new products. As such, we expect to continue allocating significant funding to these endeavors. For fiscal years 2016, 2015 and 2014, our expenses for R&D were US$29.5 million, US$31.7 million and US$33.1 million, respectively.

Our current patent portfolio is based mainly on fiber cement compositions, associated manufacturing processes and the resulting products. Our non-patented technical intellectual property consists primarily of our operating and manufacturing know-how and raw material and operating equipment specifications, all of which are maintained as trade secret information. We have enhanced our abilities to effectively create, manage and utilize our intellectual property and have implemented a strategy that increasingly uses patenting, licensing, trade secret protection and joint development to protect and increase our competitive advantage.

Table of Contents

In addition, we own a variety of licenses; industrial, commercial and financial contracts; and manufacturing processes. While we are dependent on the competitive advantage that these items provide as a whole, we are is not dependent on any one of them individually and do not consider any one of them individually to be material. We do not materially rely on intellectual property licensed from any outside third parties. However, we cannot assure that our intellectual property and other proprietary information will be protected in all cases. In addition, if our research and development efforts fail to generate new, innovative products or processes, our overall profit margins may decrease and demand for our products may fall. See “Section 3 – Risk Factors.”

Governmental Regulation

As an Irish plc, we are governed by the Irish Companies Act 2014 and are also subject to all applicable European Union level legislation. We also operate under the regulatory requirements of numerous jurisdictions and organizations, including the ASX, ASIC, the NYSE, the SEC, the Irish Takeover Panel and various other federal, state, local and foreign rulemaking bodies. See “Section 3 – Constitution” for additional information regarding the Irish Companies Act 2014 and regulations to which we are subject.

Environmental, Health and Safety Regulation

Our operations and properties are subject to extensive federal, state, local and foreign environmental protection, health and safety laws, regulations and ordinances governing activities and operations that may have adverse environmental effects. As it relates to our operations, our manufacturing plants produce regulated materials, including waste water and air emissions. The waste water produced from our manufacturing plants is internally recycled and reused before eventually being discharged to publicly owned treatment works, a process which is monitored by us, as well as by regulators. In addition, we actively monitor air emissions and other regulated materials produced by our plants so as to ensure compliance with the various environmental regulations under which we operate.

Some environmental laws provide that a current or previous owner or operator of real property may be liable for the costs of investigation, removal or remediation of certain regulated materials on, under, or in that property or other impacted properties. In addition, persons who arrange, or are deemed to have arranged, for the disposal or treatment of certain regulated materials may also be liable for the costs of investigation, removal or remediation of the regulated materials at the disposal or treatment site, regardless of whether the affected site is owned or operated by such person. Environmental laws often impose liability whether or not the owner, operator, transporter or arranger knew of, or was responsible for, the presence of such regulated materials. Also, third parties may make claims against owners or operators of properties for personal injuries, property damage and/or for clean-up associated with releases of certain regulated materials pursuant to applicable environmental laws and common law tort theories, including strict liability.

In the past, from time to time, we have received notices of alleged discharges in excess of our water and air permit limits. In each case, and in compliance with our Environmental Policy, we have addressed the concerns raised in those notices, in part, through capital expenditures intended to prevent future discharges in excess of permitted levels and, on occasion, the payment of associated minor fines.

Table of Contents

Environmental compliance costs in the future will depend, in part, on continued oversight of operations, expansion of operations and manufacturing activities, regulatory developments and future requirements that cannot presently be predicted.

Organizational Structure

JHI plc is incorporated and domiciled in Ireland and the table below sets forth our significant subsidiaries, all of which are wholly-owned by JHI plc, either directly or indirectly, as of 30 April 2016.

Table of Contents

Property, Plants and Equipment

We believe we have some of the largest and lowest cost fiber cement manufacturing plants across the United States, Australia and New Zealand, with our plants servicing both domestic and export markets. Our plants are ideally located to take advantage of established transportation networks, allowing us to distribute our products into key markets, while also providing easy access to key raw materials.

Manufacturing Capacity

At 31 March 2016, we had manufacturing facilities at the following locations:

Table of Contents

Prior to the fourth quarter of fiscal year 2016, we disclosed an annual flat sheet design capacity based on operation of the machines for 24 hours per day, seven days per week, producing 5/16” medium density product at an optimal operating speed. However, beginning in the fourth quarter of fiscal year 2016, management determined that for measuring the annual flat sheet design capacity of the fiber cement network, the calculation should incorporate our historical experience with certain factors such as demand, product mix of varying thickness and density, batch size, plant availability and differing production speeds multiplied by 24 hours per day, seven days per week.

Based on the revised methodology noted above, for the year ended 31 March 2016, we had an annual flat sheet design capacity of 3,005 mmsf and 625 mmsf in the United States and Asia Pacific, respectively. It is important to note that annual design capacity does not necessarily reflect the actual capacity utilization rates of our manufacturing facilities, with actual utilization affected by factors such as demand, product mix, batch size, plant availability and production speeds. For fiscal year 2016, actual capacity utilization across our plants was an average of 70% and 73% in the United States and Asia Pacific, respectively.

Based on the revised methodology noted above, for the year ended 31 March 2015, we had an annual flat sheet design capacity of 3,041 mmsf and 559 mmsf in the United States and Asia Pacific, respectively. It is important to note that annual design capacity does not necessarily reflect the actual capacity utilization rates of our manufacturing facilities, with actual utilization affected by factors such as demand, product mix, batch size, plant availability and production speeds. For fiscal 2015, actual capacity utilization across our plants was an average of 72% and 83% in the United States and Asia Pacific, respectively.

During the first quarter of fiscal year 2016, we completed the sale of our Blandon, Pennsylvania location and our Australian Pipes business.

Mines

We lease silica quartz mine sites in Tacoma, Washington, Reno, Nevada and Victorville, California. The lease for our quartz mine in Tacoma, Washington expires in February 2018 (with options to renew). The lease for our silica quartz mine site in Reno, Nevada expires in January 2019. The lease for our silica mine site in Victorville, California expires on 31 May 2016. Further, we own rights to an additional property in Victorville, California. As of 30 April 2016, however, we have not begun to mine this site.

As a mine operator, we are required by Section 1503(a) of the Dodd-Frank Wall Street Reform and Consumer Protection Act (the “Dodd-Frank Act”), and rules promulgated by the SEC implementing that section of the Dodd-Frank Act, to provide certain information concerning mine safety violations and other regulatory matters concerning the operation of our mines. During fiscal year 2016, we did not receive any notices, citations, orders, legal action or other communication from the US Department of Labor’s Mine Safety and Health Administration that would necessitate

Table of Contents

additional disclosure under Section 1503(a) of the Dodd-Frank Act. Similarly, we have not experienced any mining-related fatalities in our mining operations. There are currently no pending legal actions before the Federal Mine Safety and Health Review Commission related to our mining operations.

Capital Expenditures

We utilize a mix of operating cash flow and debt facilities to fund our capital expenditure projects and investments. We continuously invest in equipment maintenance and upgrades to ensure continued environmental compliance and operating effectiveness of our plants. The following table sets forth our capital expenditures for the three most recent fiscal years:

Significant active capital expenditures

At 31 March 2016, the following significant capital expenditure projects remain in progress:

Significant completed capital expenditure projects

Following is a list of significant capital expenditure projects we have invested in over the three most recent fiscal years:

Table of Contents

Capital Divestitures

During the three most recent fiscal years, we did not make any material capital divestitures. On 30 June 2015, we finalized the sale of our Australian Pipes business. Additionally, on 1 June 2015 we finalized the sale of our Blandon, Pennsylvania location. We do not consider the disposition of the pipes business or sale of Blandon, Pennsylvania location material divestitures or strategic shifts in the nature of our operations.

Table of Contents

DIRECTORS, SENIOR MANAGEMENT AND EMPLOYEES

James Hardie Executive Team

Our management is overseen by our executive team, whose members cover the key areas of fiber cement research and development, production, manufacturing, investor relations, finance and legal.

Members of our executive team at 30 April 2016 (in alphabetical order) are:

Joe Blasko BSFS, JD

General Counsel and Chief Compliance Officer

Age 49

From 2004 to 2006, Mr Blasko was Associate General Counsel at The Scotts Miracle-Gro Company, serving as the effective “general counsel” to numerous corporate divisions within the organization. From 1997 to 2004, Mr Blasko gained considerable regulatory and litigation expertise working at Vorys, Sater, Seymour and Pease LLP in Ohio.

Mr Blasko has a Juris Doctor from Case Western Reserve University in Cleveland, Ohio, USA and a Bachelor of Science in Foreign Service from Georgetown University, USA, with a specialty in International Relations, Law and Organizations.

Table of Contents

Mark Fisher BSc, MBA

Executive Vice President – International

Age 45

In January 2010, he was appointed Executive General Manager – International, responsible for the Company’s non-US businesses in Australia, New Zealand, Philippines and Europe and the Company’s windows business. Effective 16 October 2015, Mr Fisher’s title became Executive Vice President – International. Mr Fisher continues to be responsible for international fiber cement operations, as well as, the Company’s non-fiber cement business development activities. He continues to report to the Company’s Chief Executive Officer (“CEO”), Mr Louis Gries.

Mr Fisher has a Bachelor of Science in Mechanical Engineering and an MBA from University of Southern California, USA.

Louis Gries BSc, MBA

Chief Executive Officer

Age 62

In April 2012, the Company announced that effective June 2012, Mr Gries would again assume responsibility for managing the US business. Effective 16 October 2015, responsibility for managing the Company’s Fiber cement operations in North America transitioned to Mr Ryan Sullivan and oversight of corporate responsibilities to Mr Matthew Marsh. As a result of this transition, Mr Gries is now focused on driving market demand growth for the Company’s fiber cement products and the continued creation of long-term shareholder value.

Before he joined James Hardie, Mr Gries worked for 13 years for USG Corp, including a variety of roles in research, plant quality and production, and product and plant management.

Mr Gries has a Bachelor of Science in Mathematics from the University of Illinois, USA and an MBA from California State University, Long Beach, USA.

Table of Contents

Matthew Marsh BA, MBA

Chief Financial Officer and Executive Vice President – Corporate

Age 41

After a 16-year career at General Electric Company (“GE”), Mr Marsh brings a strong background in financial management. Before joining James Hardie, Mr Marsh most recently served as CFO of GE Healthcare’s IT business. Prior to being named CFO of GE Healthcare IT, Mr Marsh oversaw the finance operations for GE Healthcare’s US Healthcare Systems and US Diagnostic Imaging businesses.

Prior to those appointments, Mr Marsh travelled globally with the GE Internal Audit Staff gaining extensive experience in several industries including appliances, information services, distribution and supply, aviation, plastics, financial services, capital markets and healthcare, across more than twenty countries. Mr Marsh has graduated from GE’s Financial Management Program (FMP).

Mr Marsh has a Bachelor of Arts in Economics and Public Affairs from Syracuse University, USA and an MBA from University of Chicago’s Booth School of Business, USA.

Table of Contents

Sean O’Sullivan BA, MBA, Fellow AIRA

Vice President — Investor & Media Relations

Age 50

In November 2014, Mr O’Sullivan was inducted as a Fellow of the Australasian Investor Relations Association (AIRA).

Mr O’Sullivan has a Bachelor of Arts in Economics from Sydney University, Australia and an MBA from Macquarie Graduate School of Management, Australia.

Table of Contents

Ryan Sullivan BSc, MS, MBA

Executive Vice President and President – James Hardie Building Products

Age 42

Vice President and President — James Hardie Building Products. In this role, Mr Sullivan is responsible for the daily management of James Hardie Building Products’ fiber cement operations in North America, including manufacturing, supply chain and engineering operations, R&D and product development, and sales and marketing. He continues to report to the Company’s Chief Executive Officer, Mr Louis Gries.

Before joining James Hardie, Mr Sullivan was a senior manager at Marconi Communications where he held numerous positions and had global responsibility. He has also worked in the fields of nuclear power and advanced robotics.

Mr Sullivan has a Bachelor of Science in Mechanical Engineering with a minor in Engineering Design from Carnegie Mellon University, USA, a Masters of Science in Electrical Engineering from the University of Pittsburgh, USA and an MBA from the University of Pittsburgh Katz School, USA.

Table of Contents

Board of Directors

James Hardie’s directors have widespread experience, spanning general management, finance, law, marketing and accounting. Each director also brings valuable international experience that assists with James Hardie’s growth.

Members of the Board of Directors (the “Board”) at 31 March 2016 are:

Michael Hammes BS, MBA

Age 74

Sunrise Medical, Inc. (2000-2007), Chairman and CEO of Guide Corporation (1998-2000), Chairman and CEO of Coleman Company, Inc. (1993-1997), Vice Chairman of Black & Decker Corporation (1992-1993) and various senior executive roles with Chrysler Corporation (1986-1990) and Ford Motor Company (1979-1986).

Directorships of listed companies in the past five years: Current – Director of Navistar International Corporation (since 1996); Director of DynaVox Mayer-Johnson (listed in April 2010).

Other: Resident of the United States.

Last elected: August 2014

Term expires: August 2016

Table of Contents

Donald McGauchie AO

Age 66

advisory positions to the Australian Government.

Directorships of listed companies in the past five years: Current – Chairman (since 2010) and Director (since 2010) of Australian Agricultural Company Limited; Chairman (since 2010) and Director (since 2003) of Nufarm Limited; Director of GrainCorp Limited (since 2009).

Other directorships: Chairman of Australian Wool Testing Authority (since 2005) and Director (since 1999); Former Director of The Reserve Bank of Australia (2001-2011)

Other: Resident of Australia.

Last elected: August 2013

Term expires: August 2016

Brian Anderson BS, MBA, CPA

Age 65

President and CFO of OfficeMax, Inc. (2004-2005). Earlier in his career, Mr Anderson was an Audit Partner of Deloitte & Touche LLP (1986-1991).

Directorships of listed companies in the past five years: Current – Chairman (since 2010) and Director (since 2005) of A.M. Castle & Co.; Director of PulteGroup (since 2005); Director of W.W. Grainger, Inc. (since 1999). Former – Lead Director of W.W. Grainger, Inc. (2011-2014).

Other: Resident of the United States.

Last elected: August 2015

Term expires: August 2018

Table of Contents

Russell Chenu BCom, MBA

Age 66

was responsible for accounting, treasury, taxation, corporate finance, information technology and systems, and procurement. Mr Chenu retired as CFO in November 2013.

Mr Chenu is an experienced corporate and finance executive who held senior finance and management positions with a number of Australian publicly-listed companies. In a number of these senior roles, he was engaged in significant strategic business planning and business change, including several turnarounds, new market expansions and management leadership initiatives.

Mr Chenu has a Bachelor of Commerce from the University of Melbourne and an MBA from Macquarie Graduate School of Management, Australia.

Directorships of listed companies in the past five years: Current – Director of Reliance Worldwide Corporation Limited (since April 2016; listed April 2016); Director of CIMIC Group Limited (since 2014); Director of Metro Performance Glass Limited (since 2014).

Other: Resident of Australia.

Last elected: August 2014

Term expires: August 2017

Table of Contents

David D. Harrison BA, MBA, CMA

Age 69

President and CFO (1994-1996 and 2000-2007) and Vice President and CFO roles at Scotts, Inc. and Coltec Industries, Inc. (1996-2000).

Directorships of listed companies in the past five years: Current – Director of National Oilwell Varco (since 2003); Former – Director of Navistar International Corporation (2007-2012).

Other: Resident of the United States.

Last elected: August 2013

Term expires: August 2016

Andrea Gisle Joosen MSc, BSc

Age 52

several senior marketing roles with Procter & Gamble and Johnson & Johnson.

Directorships of listed companies in the past five years: Current – Director of BillerudKorsnas AB (since 2015); Director of Dixons Carphone plc (since 2014); Director of ICA Gruppen AB (since 2010); Former – Director of Dixons Retail plc (2012-2013).

Other directorships: Chairman and Director of Teknikmagasinet AB (since 2015); Director of Mr Green AB (since 2015); Director of Neopitch AB (since 2004)

Other: Resident of Sweden.

Last elected: August 2015

Term expires: August 2018

Table of Contents

Alison Littley BA, FCIPS

Age 53

Solutions, a UK Government Agency responsible for procurement of goods and services on behalf of UK government and public sector bodies (2006-2011). She has previously held senior management roles in Diageo plc (1999-2006) and Mars, Inc. (1981-1999). She serves on the Board of Weightmans LLP, a UK law firm and Eakin Healthcare Ltd, a medical device company.

Directorships of listed companies in the past five years: None.

Other: Resident of the United Kingdom.

Last elected: August 2015

Term expires: August 2018

James Osborne BA Hons, LLB

Age 67

1979 and serving as the firm’s managing partner (1982-1994). He has served as a consultant to the firm since 1994. Mr Osborne also contributed to the listing of Ryanair in London, New York and Dublin and continues to serve on Ryanair’s board.

Directorships of listed companies in the past five years: Current – Director of Ryanair Holdings plc (since 1996); Chairman and Director of Oneview Healthcare plc (since 2013, listed March 2016). Former – Chairman of Independent News & Media (2011-2012).

Other directorships: Chairman of Eason Holdings plc (since 2013); Chairman of Jellia Holdings Limited (since 2014); Chairman of ELST (since 2012)

Other: Resident of Ireland.

Last elected: August 2015

Term expires: August 2018

Table of Contents

Rudolf van der Meer M.Ch.Eng

Age 71

Chemicals (1993-2000), and member of the five person Executive Board (1993-2005).

Directorships of listed companies in the past five years: Current – Director of LyondellBasell Industries N.V. (since 2010); Former – Member of the Supervisory Board of Hagemeyer N.V. (2006-2008); Chairman of the Supervisory Board of Royal Imtech N.V. (2005-2013).

Other directorships: Former Chairman of the Board of Energie Beheer Nederland B.V. (2006-2013); Chairman of the Supervisory Board of VGZ Health Insurance (since 2011)

Other: Resident of the Netherlands.

Last elected: August 2014

Term expires: August 2017

Table of Contents

Remuneration Report

This Remuneration Report describes our executive remuneration philosophy, programs and objectives and explains the decisions of the Remuneration Committee and the Board of Directors (the “Board”) for our senior executive officers’ fiscal year 2016 remuneration.

We are not required to produce a remuneration report under applicable Irish, Australian or US rules or regulations. However, taking into consideration our significant Australian and US shareholder bases and our primary listing on the ASX, we have voluntarily produced a remuneration report consistent with those provided by similarly situated companies for non-binding shareholder approval since 2005.

In this Remuneration Report, we first provide a summary of our business performance and the key remuneration considerations and decisions made in fiscal year 2016. We then describe in detail our remuneration philosophy, the individual elements of our remuneration program and the linkage between our remuneration programs and our pay-for-performance philosophy. For fiscal year 2016, our senior executive officers (Chief Executive Officer (“CEO”), Chief Financial Officer (“CFO”) and the other three highest paid executive officers based on total compensation that was earned or accrued for fiscal year 2016) (“Senior Executive Officers”) are:

This Remuneration Report has been adopted by our Board on the recommendation of the Remuneration Committee.

EXECUTIVE SUMMARY

Fiscal Year 2016 Business Highlights¹

We delivered strong financial performance in fiscal year 2016, highlighted by Adjusted net operating profit of US$242.9 million, Adjusted earnings before interest and taxes (“EBIT”) of US$350.7 million, and net sales of US$1.7 billion. In addition, we achieved a 45% increase in net cash provided by operating activities, compared to the fiscal year 2015, and $268.8 million of capital returned to shareholders through a combination of dividends and the previously announced share buyback program.

Table of Contents

The following graphs show our performance for key financial measures during fiscal year 2016, with a comparison to prior corresponding periods:

Fiscal Year 2016 Compensation Highlights

Our fiscal year 2016 compensation continued to reflect and promote our pay-for-performance philosophy and our stated goal to position Senior Executive Officer fixed base salary and benefits at the median and total target direct remuneration (comprising fixed and target variable remuneration) at the 75th percentile of our Peer Group (defined herein), if stretch short and long-term target performance goals are met. During May 2015, the Board, with the assistance of the Remuneration Committee and its independent remuneration advisers, undertook its annual review of our existing remuneration policies, programs and arrangements and determined the following for fiscal year 2016 pay programs:

Table of Contents

Table of Contents

Fiscal Year 2016 Total Target Compensation

Remuneration packages for Senior Executive Officers reflect our remuneration philosophy and comprise a mixture of fixed base salary and benefits and variable performance-based incentives. The Remuneration Committee seeks to appropriately balance fixed and variable remuneration in order to align our total compensation structure with our pay-for-performance philosophy. The following chart summarizes total target compensation awarded to each Senior Executive Officer in fiscal year 2016:

Results of 2016 Remuneration Report Vote

In August 2015, our shareholders were asked to cast a non-binding advisory vote on our remuneration report for the fiscal year ended 31 March 2015. Although we are not required under applicable Irish, Australian or US laws or regulations to provide a shareholder vote on our executive remuneration practices, the Board believes that it is important to engage shareholders on this important issue and we have voluntarily submitted our remuneration report for non-binding shareholder approval on an annual basis since 2005 and currently intend to continue to do so. At our 2015 Annual General Meeting, our shareholders approved our remuneration report, with more than 86% of the votes cast in support of our remuneration program. The Remuneration Committee considered the results of this supportive advisory vote, together with the other factors and data discussed in this Remuneration Report, in determining our executive remuneration policies, objectives and decisions, as well as our shareholder engagement efforts to communicate these, in fiscal year 2016.

APPROACH TO SENIOR EXECUTIVE REMUNERATION

Remuneration Philosophy

As our main business and all of our Senior Executive Officers are located in the US, our remuneration philosophy is to provide our Senior Executive Officers with an overall package that is competitive with Peer Group companies (defined herein) exposed to the US housing market. Within this philosophy, the executive remuneration framework emphasizes operational excellence and shareholder value creation through incentives which link executive remuneration with the interests of shareholders. Our remuneration plans and programs are structured to enable us to: (i) attract and retain talented executives; (ii) reward outstanding individual and corporate performance; and (iii) align the interests of our executives to the interests of our shareholders,

Table of Contents

with the ultimate goal of improving long-term value for our shareholders. This pay-for-performance system continues to serve as the framework for executive remuneration, aligning the remuneration received with the performance achieved.

Composition of Remuneration Packages

In line with our remuneration philosophy, our goal is to position Senior Executive Officer fixed base salary and benefits at the median and total target direct remuneration (comprising fixed and target variable remuneration) at the 75th percentile of our Peer Group, if stretch short and long-term target performance goals are met. Performance goals for target variable performance-based incentive remuneration are set with the expectation that we will deliver results in the top quartile of our Peer Group. Performance below this level will result in variable remuneration payments below target (and potentially zero for poor performance). Performance above this level will result in variable remuneration payments above target.

Relative Weightings of Fixed and Variable Remuneration

The charts below detail the relative weightings of fixed versus variable remuneration for the CEO and other Senior Executive Officers for fiscal years 2016 and 2015. Fixed remuneration includes base salary and other fixed benefits. Variable remuneration is comprised of STI Awards and the following three LTI components: (i) relative total shareholder return restricted stock units (“Relative TSR RSUs”); (ii) return on capital employed restricted stock units (“ROCE RSUs”); and (iii) scorecard long-term incentive (“Scorecard LTI”), each of which are discussed later in this Remuneration Report. STI Awards include amounts incurred under the CP and IP plans for each fiscal year, paid in June of the following fiscal year, and LTI components are shown at total granted value.

Table of Contents

Setting Remuneration Packages

Remuneration decisions are based on the executive remuneration philosophy and framework described in this Remuneration Report. The Remuneration Committee reviews and the Board approves this framework each year.

Remuneration packages for Senior Executive Officers are evaluated each year to make sure that they continue to align with our compensation philosophy, are competitive with our Peer Group and developments in the market, and continue to support our business structure and objectives. In making decisions regarding individual Senior Executive Officers, the Remuneration Committee takes into account the results of an annual remuneration positioning review provided by the Remuneration Committee’s independent advisor, as well as the Senior Executive Officer’s responsibilities and performance.

All aspects of the remuneration package for our CEO, and CFO are determined by the Remuneration Committee and ratified by the Board. All aspects of the remuneration package for the remaining Senior Executive Officers are determined by the Remuneration Committee on the recommendation of the CEO.

Remuneration Committee Governance

The remuneration program for our Senior Executive Officers is overseen by our Remuneration Committee, the members of which are appointed by the Board. As prescribed by the Remuneration Committee Charter, the duties of the Remuneration Committee include, among other things: (i) administering and making recommendations on our incentive compensation and equity-based remuneration plans; (ii) reviewing the remuneration of directors; (iii) reviewing the remuneration framework for the Company; and (iv) making recommendations to the Board on our recruitment, retention and termination policies and procedures for senior management. The

Table of Contents

current members of the Remuneration Committee are David Harrison (Chairman), Brian Anderson, Russell Chenu, Michael Hammes and Alison Littley, the majority of whom are independent non-executive directors. A more complete description of these and other Remuneration Committee functions is contained in the Remuneration Committee’s Charter, a copy of which is available in the Corporate Governance section of our investor relations website (www.ir.jameshardie.com.au).

Summary of Executive Compensation Practices

The following table summarizes certain of the key governance practices employed by the Remuneration Committee relative to our executive compensation practices, including those practices which we believe are important drivers of both short- and long-term corporate performance and those practices which we believe are not aligned with the long-term interests of our shareholders:

Table of Contents

Remuneration Advisers

As permitted by the Remuneration Committee Charter, the Remuneration Committee retained Aon Hewitt (in the US) and Guerdon Associates (in Australia) as its independent advisers for matters regarding remuneration for fiscal year 2016. The Remuneration Committee reviews the appointment of its advisors each year. Both Aon Hewitt and Guerdon Associates provided the Remuneration Committee with written certification during fiscal year 2016 to support their re-appointment. In those certifications, the advisors: (i) confirmed that their pay recommendations were made without undue influence from any member of our management; and (ii) provided detailed responses to the six independence factors a Remuneration Committee should consider under relevant NYSE rules, and confirmed their independence based on these factors.

The Remuneration Committee reviewed these certifications before re-appointing each advisor for fiscal year 2017.

Peer Group Analysis

To assist the Remuneration Committee in making remuneration decisions, the Remuneration Committee evaluates the remuneration of our Senior Executive Officers against a designated set of companies (the “Peer Group”). The Peer Group, which is reviewed by the Remuneration Committee on an annual basis, consists of companies that are similar to us in terms of certain factors, including size, industry, and exposure to the US housing market. For fiscal year 2016, the Peer Group remained unchanged from fiscal year 2015. The Remuneration Committee believes that US market focused companies are a more appropriate peer group than ASX-listed companies, as they are exposed to the same macroeconomic factors in the US housing market as those we face. The names of the 24 companies comprising the Peer Group are set forth below.

Performance Linkage with Remuneration Policy

During its annual review, the Remuneration Committee assessed our performance in fiscal year 2016 against the background of the continued gradual recovery in the US and Asia Pacific markets. This review included assessing fiscal year 2016 performance against:

Table of Contents

Based on that review, the Board and the Remuneration Committee concluded that management’s performance in fiscal year 2016 was on the whole: (i) significantly above target on earnings and slightly above target on growth measures, resulting in STI variable remuneration outcomes being above target for fiscal year 2016; and (ii) superior to the 75th percentile of our Peer Group on TSR performance and substantially above expectations on long-term strategic measures included in the Scorecard (when taken together with performance in fiscal years 2014 and 2015), resulting in LTI variable remuneration being above target for fiscal years 2014-2016.

More details about this assessment, including the percentage of the maximum variable remuneration awarded to or forfeited by Senior Executive Officers is set out on pages 37 through 48 of this Remuneration Report.

DESCRIPTION OF 2016 REMUNERATION ELEMENTS

Base Salaries and Other Fixed Remuneration Benefits

Base salary provides a guaranteed level of income that recognizes the market value of the position and internal equities between roles, and the individual’s capability, experience and performance. Annual base salary increases are not automatic. Base salaries for Senior Executive Officers are positioned around the market median for positions of similar responsibility and are reviewed by the Remuneration Committee each year.

In addition, Senior Executive Officers may receive certain other limited fixed benefits, such as medical and life insurance benefits, car allowances, participation in executive wellness programs and an annual financial planning allowance. For fiscal year 2016, the base salary and value of other fixed benefits for each of our Senior Executive Officers is provided in the Base Pay and Other Benefits columns of the remuneration table, in sectioned titled “Remuneration Paid to Senior Executive Officers”.

Retirement Plan

In every country in which we operate, we offer employees access to pension, superannuation or individual retirement savings plans consistent with the laws of the respective country.

In the US, we sponsor a defined contribution plan, the James Hardie Retirement and Profit Sharing Plan (the “401(k) Plan”). The 401(k) Plan is a tax-qualified retirement and savings plan covering all US employees, including our Senior Executive Officers, subject to certain eligibility requirements. Participating employees were able to elect to reduce their current annual compensation by up to US$18,000 in calendar year 2015 and have the amount of such reduction contributed to the 401(k) Plan, with a maximum eligible compensation limit of US$265,000. In addition, we match employee contributions dollar for dollar up to a maximum of the first 6% of an employee’s eligible compensation.

Table of Contents

Incentive Arrangements

In addition to the base salary and other fixed benefits provided to our Senior Executive Officers, the Remuneration Committee reviews and approves a combination of both short-term and long-term variable incentive programs on an annual basis. For fiscal year 2016, our variable incentive plans for Senior Executive Officers were as follows:

STI Plans

On an annual basis, the Remuneration Committee approves a STI target for all Senior Executive Officers, expressed as a percentage of base salary, which is allocated between individual goals and company goals under the IP and CP Plans, respectively. For fiscal year 2016, the STI target percentage for Mr Gries was 125% of base salary and 60% of base salary for Messrs Marsh, Sullivan, Fisher and Blasko, with 80% allocated to the CP Plan and 20% allocated to the IP Plan for all Senior Executive Officers.

Since fiscal year 2014, the Remuneration Committee has applied a ‘circuit breaker’ to the STI plans which, for Senior Executive Officers, will prevent payment of any STI under the CP and IP Plans unless our performance exceeds a level approved by the Remuneration Committee each year. For fiscal year 2016, the ‘circuit breaker’ was set at 60% of our fiscal year 2016 plan Adjusted EBIT (indexed to housing starts) less any impairment costs the Remuneration Committee determines should be disregarded.

CP Plan

The CP Plan is based on a series of payout matrices for the US and Asia Pacific businesses, which provide a range of possible payouts depending on our performance against hurdles which assess volume growth relative to, and above, market (“Growth Measure”), earnings (“Return Measure”), and for the US business, performance of the interiors business and performance against certain “wood-look” competitors. Each Senior Executive Officer can receive between 0% and 300% of their STI target allocated to the CP Plan based on the results of the payout multiple the Senior Executive Officer is tied to. All Senior Executive Officers are tied to either the US multiple (Messr Sullivan) or a composite multiple derived from the metrics for the US (80%) and Asia Pacific (20%) businesses combined (Messrs Gries, Marsh, Fisher and Blasko).

Table of Contents

Payout Matrices

We use both performance measures (Growth Measure and Return Measure) in the payout matrices for our US and Asia Pacific businesses in order to ensure that as management increases its top line market growth focus, it does not do so at the expense of short- to medium-term earnings. Management is encouraged to balance market growth and earnings returns since achievement of a higher reward requires management to generate both strong earnings and growth relative to and above market. Higher returns on one measure at the expense of the other measure may result in a lower reward or no reward at all.

To ensure that the payout matrices represent genuinely challenging targets aligned with our executive remuneration philosophy, particularly in light of the continued, but gradual recovery of the US housing market, the Growth Measure is indexed to take into account changes in the US and Asia Pacific new housing starts and the US repair and remodel market and the Return Measure is indexed to take into account changes in pulp prices. The targets for the Return Measure exclude costs related to legacy issues. The Remuneration Committee has reserved for itself discretion to change the STI paid. Examples of instances when the Remuneration Committee would consider exercising this discretion include external factors outside of management’s control, and for the US CP Plan only, if the general shift toward smaller homes at each segment of the US market is considered sufficiently material. The Remuneration Committee will disclose the reasons for any such exercise of discretion.

The Remuneration Committee believes that the payout matrices are appropriate because they provide management with an incentive to achieve overall corporate goals, balance growth with returns in our primary markets, recognize the need to flexibly respond to strategic opportunities, incorporate indexing relative to market growth to account for factors beyond management’s control, and incorporate Remuneration Committee discretion to ensure appropriate outcomes. Payouts under the US matrix may range from 0% to 200% of target, while payouts under the Asia Pacific matrix may range from 0 to 300% of target.

We do not disclose the volume Growth Measure and earnings Return Measure targets for our US or Asia Pacific businesses since these are commercial-in-confidence. However, achieving a target payment for the Return Measure under either the US or Asia Pacific payout matrix for fiscal year 2016 would have required performance above the average of performance for the previous three years and the fiscal year 2016 plan. Achieving a target payout for the Growth Measure requires growth substantially above market growth.

Additional US Performance Metrics

In addition to the Growth Measure and Return Measure components of the CP plan, for the US business only, the Remuneration Committee has implemented additional performance measures in order to better align and focus management’s performance on initiatives that are key to the success of the US business. For fiscal year 2016, the Remuneration Committee approved changes to the performance measures for the US business to increase the weight of key business initiatives in the calculation of determining STI paid. As a result, the US payout multiple for fiscal year 2016 is determined by performance against the matrix multiple (Growth and Return measures for 70% of the STI opportunity), the interiors product business multiple (for 10% of STI

Table of Contents

opportunity), and the “Wood-look” multiple (for 20% of STI opportunity). The overarching formula for the US payout multiple is:

Each payout factor (Matrix Factor, Interiors Factor, and “Wood-look” Factor) is capped as follows to properly balance management’s focus across volume growth, returns and key initiatives:

The Interiors Multiple is measured as a function of the revenue growth of our interiors business in fiscal year 2016. The “Wood-look” Multiple is measured as our growth against key “wood-look” competition.

We do not disclose the interiors volume growth or “wood-look” targets since these are commercial-in-confidence. However, achieving a target payment for fiscal year 2016 would have required performance above performance for fiscal year 2015 for interiors volume growth and substantial growth against key “wood-look” competition.

IP Plan

Under the IP Plan, the Remuneration Committee approves a series of one-year individual performance goals which, along with personal growth and development goals, are used to assess the performance of our Senior Executive Officers. The IP Plan links financial rewards to the Senior Executive Officer’s achievement of specific objectives that have benefited us and contributed to shareholder value, but are not captured directly by financial measures in the CP Plan. Each Senior Executive Officer can receive between 0% and 150% of their STI target allocated to the IP Plan based on achievement of individual performance and personal growth and development goals.

STI Plan Performance for Fiscal Year 2016

Our results and the subsequent STI payouts for fiscal year 2016 were above STI target as a result of:

Table of Contents

The Senior Executive Officers’ performance and the subsequent STI payouts for fiscal year 2016 were generally at or above target based on each Senior Executive Officer’s achievement of fiscal year 2016 one-year individual performance and personal growth and development goals.

For fiscal year 2016, the amount to be paid to each of our Senior Executive Officers under the STI Plans is provided in the STI Award column of the remuneration table, in the section titled “Remuneration Paid to Senior Executive Officers”. The percentage of the maximum STI Variable Remuneration awarded to or forfeited by each Senior Executive Officer for (individual and company) performance in fiscal year 2016 compared to fiscal year 2015 was: