Table of Contents

Exhibit 99.4

James Hardie Industries plc

Irish Statutory Accounts

For the Year Ended 31 March 2017

Table of Contents

James Hardie Industries plc

Directors’ Report and

Consolidated Financial Statements

For the Year Ended 31 March 2017

Table of Contents

James Hardie Industries plc

Table of Contents

Table of Contents

James Hardie Industries plc

Reading this Report

These Irish Statutory Accounts contain a Directors’ Report and audited consolidated financial statements and accompanying footnote disclosures prepared in accordance with accounting principles generally accepted in the United States of America (“US GAAP”), modified to comply with specific provisions of Irish Company Law for the consolidated entity consisting of James Hardie Industries plc and its direct and indirect wholly-owned subsidiaries and special purpose entity, (collectively referred to as “the Company”). In addition, these Irish Statutory Accounts include the James Hardie Industries plc Company Balance Sheet and related footnotes prepared on the going concern basis under the historical cost convention in accordance with the Companies Act 2014 and Financial Reporting Standard 101 Reduced Disclosure Framework (“FRS 101”).

For the year ended 31 March 2017, the Company has included, as an Appendix to the Directors’ Report, its fiscal year 2017 US and Australian Annual Report (“FY2017 Annual Report”). This report has been filed with the US Securities and Exchange Commission (“SEC”) and, except for the exhibits to the FY2017 Annual Report, is included in its entirety as an Appendix to the Directors’ Report. These exhibits can be obtained by accessing the Company’s FY2017 Annual Report on Form 20-F on the SEC’s website at www.sec.gov and on the Investor Relations area of the Company’s website at www.jameshardie.com.au. Disclosures in the Directors’ Report and consolidated financial statements that are duplicative to the FY2017 Annual Report have been cross-referenced to the relevant section(s) in the FY2017 Annual Report.

The Independent Auditor’s Report included on pages 8-9 refers solely to the financial statements included in the Irish Statutory Accounts. The Report of Independent Registered Public Accounting Firm included in the FY2017 Annual Report (Appendix to the Directors’ Report) refers solely to the financial statements in the FY2017 Annual Report which were prepared under US GAAP. As such, readers should not rely on the Report of Independent Registered Public Accounting Firm included in the FY2017 Annual Report as it does not relate to the financial statements included in the Irish Statutory Accounts.

Table of Contents

James Hardie Industries plc

Directors’ Report

For the year ended 31 March 2017

The directors present their report and audited consolidated financial statements for the fiscal year ended 31 March 2017 on the consolidated entity of James Hardie Industries plc (“JHI plc”) and its wholly-owned subsidiaries and a special purpose entity. Unless the context indicates otherwise, JHI plc and its direct and indirect wholly-owned subsidiaries and special purpose entity (as of the time relevant to the applicable reference) are collectively referred to as “James Hardie”, the “James Hardie Group” or the “Company”.

The directors have elected to prepare the consolidated financial statements in accordance with Section 279 of the Companies Act 2014, which provides that a true and fair view of the assets and liabilities, financial position and profit or loss may be given by preparing the financial statements in accordance with accounting principles generally accepted in the United States of America (“US GAAP”), as defined in Section 279(1) of the Companies Act 2014, to the extent that the use of those principles in the preparation of the financial statements does not contravene any provision of the Companies Act 2014 or of any regulations made thereunder.

Directors’ Compliance Statement

As required by section 225(2) of the Companies Act 2014, the directors acknowledge that they are responsible for the Company’s compliance with its relevant obligations (as defined in section 225(1) of the Companies Act 2014). The directors confirm that a “compliance policy statement” (as defined in section 225(3)(a)) has been drawn up, that appropriate arrangements and structures that are, in the directors’ opinion, designed to secure material compliance with the company’s relevant obligations have been put in place and that a review of those arrangements and structures has been conducted in the financial year to which this report relates.

Audit Committee

As required by section 167(3) of the Companies Act 2014, the directors hereby state that the Company has established an audit committee.

Principal Activities

See “Information on the Company – Business Overview – General Overview of our Business” in Section 1 of the Appendix to this Directors’ Report.

Review of the Development and Performance of the Business

Trends and Economic Events

See “Management’s Discussion and Analysis – Outlook and Trend Information” in Section 2 of the Appendix to this Directors’ Report.

Operating Results

See “Management’s Discussion and Analysis – Operating Results” in Section 2 of the Appendix to this Directors’ Report.

In addition, refer to Note 1 of the consolidated financial statements in relation to the differences arising between the Irish Statutory Accounts and the Appendix to the Directors’ Report for the years ended 31 March 2017 and 2016.

Table of Contents

James Hardie Industries plc

Directors’ Report (continued)

For the year ended 31 March 2017

Liquidity and Capital Allocation

See “Management’s Discussion and Analysis – Liquidity and Capital Allocation” subsections “Overview”, “Sources of Liquidity”, “Cash Flow – Year Ended 31 March 2017”, “Borrowings”, “Capital Expenditures”, “Capital Management and Dividends” and “Management’s Discussion and Analysis – Contractual Obligations” in Section 2 of the Appendix to this Directors’ Report.

In addition, refer to Note 1 of the consolidated financial statements in relation to the differences arising between the Irish Statutory Accounts and the Appendix to the Directors’ Report for the years ended 31 March 2017 and 2016.

Principal Risks and Uncertainties

See “Risk Factors” in Section 3 of the Appendix to this Directors’ Report.

Legal Proceedings

See “Legal Proceedings” in Section 3 of the Appendix to this Directors’ Report.

Financial Instruments

See Financial Instruments in Note 2 to the US GAAP consolidated financial statements in Section 2 of the Appendix to this Directors’ Report and “Quantitative and Qualitative Disclosures About Market Risk” in Section 3 of the Appendix to this Directors’ Report.

Research and Development

See “Information on the Company - Business Overview - Dependence on Trade Secrets and Research and Development (“R&D”)” in Section 1 of the Appendix to this Directors’ Report.

Capital Management and Dividends

See Note 16 to the US GAAP consolidated financial statements in Section 2 of the Appendix to this Directors’ Report and “Management’s Discussion Analysis – Liquidity and Capital Allocation – Capital Management and Dividends” in Section 2 of the Appendix to this Directors’ Report.

In addition, refer to Note 1 of the Irish Statutory Accounts in relation to the differences arising between the Irish Statutory Accounts and the Appendix to the Directors’ Report as it related to the 125 year anniversary special dividend paid during the year ended 31 March 2015.

In respect of the share buy-back plan, see Note 8 in the Irish Statutory Accounts.

Results for the Year and Proposed Transfer to Reserves

The results for the year are set out in the consolidated statements of operations and comprehensive income on page 10. The balance to be transferred to reserves is US$276.5 million.

Future Developments

See “Management’s Discussion and Analysis – Outlook and Trend Information” in Section 2 of the Appendix to this Directors’ Report.

Table of Contents

James Hardie Industries plc

Directors’ Report (continued)

For the year ended 31 March 2017

Accounting Records

The measures taken by the directors to ensure compliance with the Company’s obligations under Section 281 to 285 of the Companies Act 2014 to keep adequate accounting records are the implementation of necessary policies and procedures for recording transactions, the employment of competent accounting personnel with appropriate expertise and the provision of adequate resources to the financial function.

The accounting records are maintained at the Company’s registered office at Second Floor, Europa House, Harcourt Centre, Harcourt Street, Dublin 2.

See “Memorandum and Articles of Association – Key Provisions of Our Constitution – Company Books of Accounts” in Section 3 of the Appendix to this Directors’ Report.

Important Events Since Year End

On 18 May 2017, the Company announced an ordinary dividend of US28.0 cents per security with a record date of 8 June 2017 and payment date of 4 August 2017.

Directors of the Company

See “Board of Directors” in Section 1 of the Appendix to this Directors’ Report for a list of the Company’s directors along with their biographies. Other than Donald McGauchie, who retired as an independent non-executive director of the Company after the Company’s Annual General Meeting (“AGM”) on 11 August 2016, the directors listed served on the Board throughout fiscal year 2017.

Disclosure of Information to Auditors

As required by section 330 of the Companies Act 2014, the directors who held office at the date of approval of this Directors’ Report confirm that so far as they are each aware, there is no relevant audit information of which the Company’s statutory auditors are unaware and each director has taken all steps that they ought to have taken as a director to make themselves aware of any relevant audit information and to establish that the Company’s statutory auditors are aware of that information.

Going Concern

The business activities, together with the factors likely to affect its future development, its financial position, financial risk management objectives, details of its financial instruments and derivative activities, and its exposures to price, credit, liquidity and cash flow risk of the Company are set out in Section 3 of the Appendix to this Directors’ Report. The James Hardie Group has considerable financial resources together with long-term contracts with a number of customers and suppliers across different geographic areas and industries. As a consequence, the directors believe that the James Hardie Group is well placed to manage its business risks successfully despite the current uncertain economic outlook. After making enquiries, the directors have a reasonable expectation that the James Hardie Group has adequate resources to continue in operational existence for the foreseeable future. Accordingly, they continue to adopt the going concern basis in preparing the annual report and accounts.

Table of Contents

James Hardie Industries plc

Directors’ Report (continued)

For the year ended 31 March 2017

James Hardie Industries plc (“JHI plc” or the “Parent Company”) was in a net current liability position of US$1.4 million and a net current liability position of US$4.0 million at 31 March 2017 and 2016, respectively. The Parent Company has minimal liabilities other than amounts owed to the Group. These undertakings will not be repaid until all other debts are satisfied. In addition, the Group has US$200.0 million of available unused inter-group loan facilities. The directors are satisfied that the Parent Company will continue to generate adequate cash to meet all its obligations as they fall due. On this basis, and after making inquiries, the directors have reasonable expectations that the Parent Company has adequate resources to continue in operational existence for the foreseeable future. Accordingly, the Parent Company continues to adopt the going concern assumption in preparing the financial statements. These financial statements do not include any adjustments to the carrying amount or classification of assets and liabilities that would result if the Parent Company were unable to continue as a going concern.

Directors’ and Secretary’s Interests

No director, the Company Secretary nor any member of their immediate family had any interest in shares or debentures of any subsidiary. The interests of the executive director (Mr Louis Gries) and non-executive directors in the ordinary share capital of the Company at the beginning (or date of appointment if later) and end of fiscal year 2017 are set out in “Remuneration – Share Ownership and Stock Based Compensation Arrangements” in Section 1 of the Appendix to this Directors’ Report. The non-executive directors had no options or restricted stock units at the beginning and end of fiscal year 2017.

The interests of Ms Mercer, the Company Secretary, in the ordinary share capital of the Company was 110 shares, nil options and 5,622 RSUs at 31 March 2017 and 110 shares, nil options and 4,871 RSUs at 31 March 2016.

Political Donations

No political contributions that require disclosure under Irish law were made during fiscal year 2017.

Subsidiary Companies

Information regarding subsidiary undertakings is provided in Note 30 to the consolidated financial statements.

Branches

As of 31 March 2017, the Company does not operate any branches outside of Ireland.

Annual General Meeting

The Annual General Meeting of the Company will be held on 8 August 2017 at James Hardie’s Corporate Headquarters in Dublin, Ireland.

Auditors

The auditors Ernst & Young, Chartered Accountants, are willing to continue in office and a resolution authorising the directors to fix their remuneration will be submitted at the Annual General Meeting.

Table of Contents

James Hardie Industries plc

Directors’ Report (continued)

For the year ended 31 March 2017

Table of Contents

James Hardie Industries plc

Directors’ Responsibilities Statement

Company law in the Republic of Ireland requires the directors to prepare financial statements for each financial year which give a true and fair view of the state of the assets, liabilities and financial position of James Hardie Industries plc (“JHI plc” or the “Parent Company”) and of JHI plc and its wholly-owned subsidiaries and special purpose entity (collectively, the “Company” or the “Group”) and of the profit or loss of the Group for that period.

In preparing the financial statements of the Group, the directors are required to:

The considerations set out above for the Group are also required to be addressed by the directors in preparing the financial statements of the Parent Company (which are set out on pages 31 to 41, in respect of which the applicable accounting standards are those which are generally accepted in the Republic of Ireland.

The directors have elected to prepare the Parent Company’s financial statements in accordance with Financial Reporting Standard 101 ‘Reduced Disclosure Framework’ (“FRS 101”) as issued by the Financial Reporting Council and promulgated by the Institute of Chartered Accountants in Ireland, together with the Companies Act 2014.

Under Irish Company Law, the directors must not approve the financial statements unless they are satisfied that they give a true and fair view of the assets, liabilities and financial position of the Group and Parent Company as at the end of the financial year, and the profit or loss of the Group for the financial year, and otherwise comply with the Companies Act 2014.

The directors are responsible for keeping proper accounting records which disclose with reasonable accuracy the assets, liabilities, financial position and profit and loss of the Parent Company and which enable them to ensure that the financial statements of the Group are prepared in accordance with US GAAP and comply with the provisions of the Companies Act 2014. They are also responsible for safeguarding the assets of the Group and hence for taking reasonable steps for the prevention and detection of fraud and other irregularities.

Table of Contents

Appendix to the

Directors’ Report

FY 2017 US and Australian

Annual Report

(This document is an appendix to, and constitutes an integral part of, the Directors’ Report.)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 20-F

(Mark One)

☐  REGISTRATION STATEMENT PURSUANT TO SECTION 12(b) OR (g) OF THE SECURITIES EXCHANGE ACT OF 1934

OR

☒  ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended 31 March 2017

OR

☐  TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

OR

☐  SHELL COMPANY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Date of event requiring this shell company report

For the transition period from       to

Commission file number 1-15240

JAMES HARDIE INDUSTRIES plc

(Exact name of Registrant as specified in its charter)

N/A

(Translation of Registrant’s name into English)

Ireland

(Jurisdiction of incorporation or organization)

Europa House, Second Floor

Harcourt Centre

Harcourt Street, Dublin 2, Ireland

(Address of principal executive offices)

Natasha Mercer

Corporate Secretary

(Contact name)

353 1411 6924 (Telephone)                 353 1479 1128 (Facsimile)

Securities registered or to be registered pursuant to Section 12(b) of the Act:

Table of Contents

Securities registered or to be registered pursuant to Section 12(g) of the Act.

None

Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act.

None

Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered by the Annual Report:

440,843,275 shares of common stock at 31 March 2017

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  ☒  Yes   ☐  No

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.  ☐  Yes  ☒  No

Note — Checking the box will not relieve any registrant required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 from their obligations under those Sections.

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days.  ☒  Yes   ☐  No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  ☒  Yes   ☐  No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or an emerging growth company. See the definition of “large accelerated filer,” “accelerated filer” and “emerging growth company” in Rule 12b-2 of the Exchange Act. (Check one):

If an emerging growth company that prepares its financial statements in accordance with U.S. GAAP, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised† financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  ☐

† The term “new or revised financial accounting standard” refers to any update issued by the Financial Accounting Standards Board to its Accounting Standards Codification after 5 April 2012.

Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing:

International Financial Reporting Standards as issued by the International Accounting

If “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has elected to follow:

☐  Item 17  ☐  Item 18

If this is an Annual Report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

☐  Yes  ☒  No

Table of Contents

2017

ANNUAL REPORT

ON FORM 20-F

Table of Contents

TABLE OF CONTENTS

Table of Contents

FORM 20-F CROSS REFERENCE

Table of Contents

FORM 20-F CROSS REFERENCE (continued)

Table of Contents

SECTION 1

INTRODUCTION

James Hardie Industries plc is a world leader in the manufacture of fiber cement siding and backerboard. Our products are used in a number of markets, including new residential construction (single and multi-family housing), manufactured housing, repair and remodeling and a variety of commercial and industrial applications. We manufacture numerous types of fiber cement products with a variety of patterned profiles and surface finishes for a range of applications, including external siding and trim and soffit lining, internal linings, facades and floor and tile underlay. Our current primary geographic markets include the United States of America (“US”, “USA” or the “United States”), Canada, Australia, New Zealand, the Philippines and Europe.

James Hardie Industries plc is a “public limited company,” incorporated and existing under the laws of Ireland. Except as the context otherwise may require, references in this Annual Report on Form 20-F (this “Annual Report”) to “James Hardie,” the “James Hardie Group,” the “Company,” “JHI plc,” “we,” “our” or “us” refer to James Hardie Industries plc, together with its direct and indirect wholly owned subsidiaries as of the time relevant to the applicable reference.

For certain information about the basis of preparing the financial information in this Annual Report, see “Section 2 – Reading this Report.” In addition, this Annual Report contains statements that constitute “forward-looking statements.” For an explanation of forward-looking statements and the risks, uncertainties and assumptions to which they are subject, see “Section 2 – Reading this Report.” Further, a “Glossary of Abbreviations and Definitions” has also been included under Section 4 of this Annual Report.

The term “fiscal year” refers to our fiscal year ended 31 March of such year; the term “dollars,” “US$” or “$” refers to US dollars; and the term “A$” refers to Australian dollars.

As of 30 June 2016, the Company changed its reportable operating segments. Previously, the Company reported on three operating segments: (i) North America and Europe Fiber Cement, (ii) Asia Pacific Fiber Cement, and (iii) Research and Development. As of 30 June 2016, the Company began reporting on four operating segments: (i) North America Fiber Cement, (ii) International Fiber Cement, (iii) Other Businesses, and (iv) Research and Development. The significant changes to how certain businesses are reported in the new segment structure are as follows: (i) our European business is now reported in the International Fiber Cement segment, along with the other businesses that were historically reported in the Asia Pacific Fiber Cement segment, and (ii) business development, including some non-fiber cement operations, such as our windows business in North America, are now reported in the Other Businesses segment as opposed to previously being reported in the North America and Europe Fiber Cement segment. The Company has provided its historical segment information to be consistent with the new reportable segment structure. The change in reportable segments had no effect on the Company’s financial position, results of operations or cash flows for the periods presented. Readers are referred to Note 17 of our consolidated financial statements in Section 2 for further information on our segments.

Table of Contents

Information contained in or accessible through the websites mentioned in this Annual Report does not form a part of this Annual Report unless we specifically state that it is incorporated by reference herein. All references in this Annual Report to websites are inactive textual references and are for information only.

SELECTED FINANCIAL DATA

We have included in this Annual Report the audited consolidated financial statements of the Company, consisting of our consolidated balance sheets as of 31 March 2017 and 2016, and our consolidated statements of operations and comprehensive income, cash flows and changes in shareholders’ deficit for each of the years ended 31 March 2017, 2016 and 2015, together with the related notes thereto. The consolidated financial statements included in this Annual Report have been prepared in accordance with accounting principles generally accepted in the US (“US GAAP”).

The selected consolidated financial information, summarized below for the five most recent fiscal years has been derived in part from the Company’s consolidated financial statements. You should read the selected consolidated financial information in conjunction with the Company’s consolidated financial statements and related notes contained in “Section 2 – Consolidated Financial Statements” and with the information provided in “Section 2 – Management’s Discussion and Analysis.” Historic financial data is not necessarily indicative of our future results and you should not unduly rely on it.

Table of Contents

INFORMATION ON THE COMPANY

History and Development of the Company

James Hardie was established in 1888 as an import business, listing on the Australian Securities Exchange (“ASX”) in 1951 to become a publicly owned company in Australia. After becoming a listed company, we built a diverse portfolio of building and industrial products. In the late-1970s,

Table of Contents

we pioneered the development of asbestos-free fiber cement technology and in the early-1980’s began designing and manufacturing a wide range of fiber cement building products that made use of the benefits that came from the products’ durability, versatility and strength. Using the technical and manufacturing expertise developed in Australia, we expanded into the United States, opening our first fiber cement plant in Fontana, California in February 1990.

In September 2001, in order to maximize the benefit of our strong international growth and in order to generate higher returns for shareholders from the James Hardie Group’s continuing international expansion, the shareholders of James Hardie Industries Limited (“JHIL”), then the ultimate parent company of the James Hardie Group and the vehicle with which our shareholding was listed with the ASX, agreed to exchange their shares for shares in James Hardie Industries N.V. (“JHINV”), a Dutch public limited liability company. JHINV retained its primary listing on the ASX, and in October 2001, to reflect the new corporate structure, JHIL transferred all of its fiber cement businesses to JHINV.

In February 2010, our legal name was changed to James Hardie Industries SE when our legal form was converted from a Dutch public limited liability company to a Societas Europaea (“SE”), a European public limited liability company. This was the first stage of a two-stage re-domicile proposal to change our registered corporate domicile from the Netherlands to Ireland. On 17 June 2010, we implemented Stage 2 of the re-domicile and changed our registered corporate domicile to Ireland to become an Irish SE, becoming an Irish tax resident on 29 June 2010. On 15 October 2012, we converted from an Irish SE into our current corporate form, an Irish public limited company (“plc”).

We conduct our operations under legislation in various jurisdictions. As an Irish plc, we are governed by the Irish Companies Act 2014 and we operate under the regulatory requirements of numerous jurisdictions and organizations, including the ASX, ASIC, the New York Stock Exchange (“NYSE”), the United States Securities and Exchange Commission (“SEC”), the Irish Takeover Panel and various other rulemaking bodies.

The address of our registered office in Ireland is Europa House, Second Floor, Harcourt Centre, Harcourt Street, Dublin 2, Ireland. The telephone number there is +353 1411 6924. Our agent in the United States is CT Corporation. Its office is located at 111 Eight Avenue – 13^th Floor, New York, New York 10011. The address of our registered office in Australia is Level 3, 22 Pitt Street, Sydney NSW 2000 and the telephone number there is +61 2 8845 3360. Our share registry is maintained by Computershare Registry Services Pty Ltd. All enquires and correspondence regarding holdings should be directed to: Computershare Investor Services Pty Ltd, Level 5, 115 Grenfell Street, Adelaide, SA 5000; telephone: +61 3 9415 4000 or toll free within Australia: 1 300 855 080.

Our Agreement with Asbestos Injuries Compensation Fund

Prior to 1987, ABN 60 Pty Limited (formerly JHIL) (“ABN 60”) and two of its former subsidiaries, Amaca Pty Limited (“Amaca”) and Amaba Pty Limited (“Amaba”) (collectively the “Former James Hardie Companies”), manufactured products in Australia that contained asbestos. These products have resulted in liabilities for the Former James Hardie Companies in Australia.

In February 2007, our shareholders approved the Amended and Restated Final Funding Agreement (“AFFA”) entered into on 21 November 2006 to provide long-term funding to AICF for

Table of Contents

the compensation of proven Australian-related personal injuries for which the Former James Hardie Companies are found liable. AICF, an independent trust, subsequently assumed ownership of the Former James Hardie Companies. We do not own AICF, however, we are entitled to appoint three directors, including the Chairman and the New South Wales (“NSW”) Government is entitled to appoint two directors.

Under the terms of the AFFA, subject to the operation of an annual cash flow cap, James Hardie 117 Pty Ltd (the “Performing Subsidiary”) will make annual payments to AICF. The amount of these annual payments is dependent on several factors, including our free cash flow (as defined in the AFFA), actuarial estimations, actual claims paid, operating expenses of AICF, changes in the AUD/USD exchange rate and the annual cash flow cap. JHI plc owns 100% of the Performing Subsidiary and guarantees the Performing Subsidiary’s obligation. As a result, for US GAAP purposes, we consider JHI plc to be the primary beneficiary of AICF.

Although we have no legal ownership in AICF, for financial reporting purposes, our interest in AICF is considered variable and we consolidate AICF due to our pecuniary and contractual interests in AICF as a result of the funding arrangements outlined in the AFFA. For additional information on our consolidation of AICF and asbestos-related assets and liabilities, see Note 2 to our consolidated financial statements.

Corporate Structure

The following diagram summarizes our current corporate structure:

Business Overview

General Overview of Our Business

Based on net sales, we believe we are the largest manufacturer of fiber cement products and systems for internal and external building construction applications in the United States, Australia, New Zealand, and the Philippines. We market our fiber cement products and systems under

Table of Contents

various Hardie brand names, such as HardiePlank^®, HardiePanel^®, HardieTrim^® and HardieBacker^® boards, and other brand names such as Artisan^® by James Hardie, Cemplank^®, Scyon^® and HardieLinea^®.

The breakdown of our net sales by operating segment for each of our last three fiscal years is as follows:

Products

We manufacture a wide-range of fiber cement building materials for both internal and external use across a broad range of applications, including: external siding, internal walls, floors, ceilings, soffits, trim, fencing, decking and facades. While there are some market specific products, our core product ranges, being planks, which are used for external siding and flat panels, which are used for internal and external wall linings and floor underlayments and are sold across all of the markets in which we operate.

Products Used in External Applications

We developed a proprietary technology platform that enables us to produce thicker yet lighter-weight fiber cement products that are generally easier to handle than most traditional building products. Further, we believe that our products provide certain durability and performance advantages leading to improved maintenance, while offering comparable aesthetics to competing products such as wood and superior aesthetics when compared to vinyl siding.

Performance and design advantages:

We believe the benefits associated with our fiber cement products have enabled us to gain a competitive advantage over competing products.

Table of Contents

Products Used in Internal Applications

Compared to natural and oriented strand board and wood-based products, we believe our product range for internal applications provide the same general advantages provided by our products for external applications. In addition, our fiber cement products for internal applications exhibit less movement in response to exposure to moisture and impact damage than many competing products, providing a more consistent and durable substrate on which to install tiles. Further, we believe our ceramic tile underlayment products exhibit better handling and installation characteristics compared to fiberglass mesh cement boards.

Non-Fiber Cement Products

In addition to our portfolio of fiber cement product offerings, we continue to invest in business development opportunities aligned with our long term strategy, including our fiberglass windows business in North America.

Significant New Products

In the United States, new products released over the last three years include the HardieReveal 2.0™ panel system, James Hardie^® Insulated Lap Siding and Trim, HardieTrim^® 2x™ board, HardieTrim^® NT3^® Roughsawn board, HardieTrim^® Mouldings, Artisan^® V-Rustic premium exterior siding, custom colors using our ColorPlus^® Technology, and an improved touch-up accessory to support ColorPlus^® products.

In Australia and New Zealand, extensions to the existing Stria^® cladding products have been launched to provide Stria^® Standard 325mm, Stria^® Wide 405mm, Splayed 255mm cladding profiles. Similarly, Axon^® cladding has now been extended to provide Axon^® Smooth 133mm, Axon^® Smooth 400mm, and Axon^® Grained 133mm cladding. In addition, HardieBrace^®, a new online calculator tool is available in Australia and New Zealand, which offers a way to simplify structural bracing calculations.

In Australia only, HardieEdge^® trim for covering slab edges provides an easy to install solution to unfinished, rough concrete slab edges that would otherwise detract from the appearance of a wall clad with James Hardie products. The HardieDeck™ system continues to provide a major new product offering since its launch in 2015. Modcem^® modular flooring has provided an entry into commercial flooring applications. Similarly, Systemboard™ cladding provided a niche multi-story construction product application. Ritek^® permanent formwork walling system, a quality durable finished wall solution, will expand our product and systems offering into the growing medium to high density construction segment. Additions to the range of building science offerings include HardieWrap^® weather barrier, HardieFire^® Insulation, HardieBreak^® Thermal Strip, as well as the HardieSmart^® Boundary, Aged Care, Intertenancy and ZeroLot^® Wall Systems. The launch of new wall systems are also supported by the Compliant System^® trade mark. The performance of the ZeroLot^® wall system is supported by the new Coreshield^® protective sealer technology.

In New Zealand only, over the same timeframe, Secura^® Interior Flooring, Secura^® Exterior Flooring, Axent™ Fascia, HomeRAB^® 4.5mm Pre Cladding, Stria^® Cladding, Axon^® 400 and 133 Grained Cladding, and Linea^® Oblique™ Cladding have been launched.

Table of Contents

In the Philippines, new products released over the past three years include the extension of the established Hardieflex™ board range with the inclusion of Hardieflex™ Wet Area Walls lining. An improved version of their wall jointing compound has been launched under the HardieFlex^® Putty trade mark.

The European business continues to provide HardieFloor™ Structural Flooring, HardieFloor dB™ Structural Acoustic Flooring, and HardieQStrip™ Acoustic Batten into the market.

Principal Markets for Our Products

United States and Canada

In the US and Canada, the largest application for fiber cement building products is in external siding for the residential building industry. The external siding market includes various cladding types, including fiber cement, vinyl, natural wood, oriented strand board, hardboard, brick, stucco and stone. Based on industry estimates, vinyl has the largest share of the US and Canadian siding markets. External siding typically occupies a significant square footage component of the outside of every building. Selection of siding material is based on installed cost, durability, aesthetic appeal, strength, weather resistance, maintenance requirements and cost, insulating properties and other features. Different regions of the US and Canada show a preference amongst siding materials according to economic conditions, weather, materials availability and local preference.

Demand for siding in the US and Canada fluctuates based on the level of new residential housing starts and the repair and remodeling activity of existing homes. The level of activity is generally a function of interest rates and the availability of financing to homeowners to purchase a new home or make improvements to their existing homes, inflation, household income and wage growth, unemployment levels, demographic trends, gross domestic product growth and consumer confidence. The sale of fiber cement products in North America accounts for the largest portion of our net sales, accounting for 78%, 77% and 74% of our total net sales in fiscal years 2017, 2016 and 2015, respectively.

In the US and Canada, competition in the external siding market comes primarily from substitute products, such as natural or Oriented Strand Board, vinyl, stucco and brick. We believe we can continue to increase our market share from these competing products through targeted marketing programs designed to educate customers on our brand and the performance, design and cost advantages of our products.

International

In the Asia Pacific region, we principally sell into the Australian, New Zealand and Philippines markets, with the residential building industry representing the principal market for fiber cement products. The largest applications of fiber cement across our three primary markets are in external siding, internal walls, ceilings, floors, soffits, fences and facades. We believe the level of activity in this industry is generally a function of interest rates, inflation, household income and wage growth, unemployment levels, demographic trends, gross domestic product growth and consumer confidence. Demand for fiber cement building products is also affected by the level of new housing starts and renovation activity.

Table of Contents

In Australia, competition for fiber cement has intensified over the past decade, with two competitors establishing fiber cement manufacturing facilities and competition from imports continuing to grow. Additionally, we continue to see competition from natural and engineered wood, wallboard, masonry and brick products.

In New Zealand, we continue to see competition intensifying as fiber cement imports have become more cost competitive and overseas manufacturers look to supplement their primary operating environments with additional markets.

In the Philippines, we have seen fiber cement gain acceptance across a broader range of product applications in the last decade, leading to additional fiber cement products entering the market, along with the increased use of gypsum in fiber cement applications. In fiscal year 2017, our results were unfavorably impacted by the entrance of competitor imports. We expect this change in the overall competitive landscape to remain for some time.

We see fiber cement having long-term growth potential not only in the Philippines, but across Asia and the Middle East, as the benefits of its light-weight and durability become more widely recognized.

In Europe, fiber cement building products are used in both residential and commercial building applications in external siding, internal walls, floors, soffits and roofing. We compete in most segments, except roofing, and promote the use of fiber cement products against traditional masonry, gypsum-based products and wood-based products. Since we commenced selling our products in Europe in fiscal year 2004, we have continued to work to grow demand for our products by building awareness among distributors, builders and contractors. Management believes that the growth outlook for fiber cement in Europe is favorable, in light of stricter insulation requirements driving demand for advanced exterior cladding systems, as well as better building practices increasing the use of fiber cement in interior applications.

Seasonality

Our businesses are seasonal and typically follow activity levels in the building and construction industry. In the United States, the calendar quarters ending in December and March generally reflect reduced levels of building activity depending on weather conditions. In Australia and New Zealand, the calendar quarter ending in March is usually the quarter most affected by a slowdown due to summer holidays. In the Philippines, construction activity diminishes during the wet season from June through September and during the last half of December due to the slowdown in business activity over the holiday period. Also, general industry patterns can be affected by weather, economic conditions, industrial disputes and other factors. See “Section 3 – Risk Factors.”

Raw Materials

The principal raw materials used in the manufacture of our fiber cement products are cellulose fiber (wood-based pulp), silica (sand), Portland cement and water. We have established supplier relationships for all of our raw materials across the various markets in which we operate and we do not anticipate having difficulty in obtaining our required raw materials from these suppliers. The purchase price of these raw materials and other materials can fluctuate depending on the supply-demand situation at any given point in time.

Table of Contents

We work hard to reduce the effect of both price fluctuations and supply interruptions by entering into contracts with qualified suppliers and through continuous internal improvements in both our products and manufacturing processes.

Cellulose Fiber

Reliable access to specialized, consistent quality, low cost pulp is critical to the production of fiber cement building materials. As a result of our many years of experience and expertise in the industry, we share our internal expertise with pulp producers in New Zealand, the United States, Canada and Chile to ensure they are able to provide us with a highly specialized and proprietary formula crucial to the reinforcing cement matrix of our fiber cement products. We have confidentiality agreements with our pulp producers and we have obtained patents in the United States and in certain other countries covering certain unique aspects of our pulping formulas and processes that we believe cannot adequately be protected through confidentiality agreements. However, we cannot be assured that our intellectual property and other proprietary information will be protected in all cases. See “Section 3 – Risk Factors.”

Silica

High purity silica is sourced locally by the various production plants. In the majority of locations, we use silica sand as a silica source. In certain other locations, however, we process quartz rock and beneficiate silica sand to ensure the quality and consistency of this key raw material.

Cement

Cement is acquired in bulk from local suppliers. We continue to evaluate options on agreements with suppliers for the purchase of cement that can lock in our cement prices over longer periods of time.

Water

We use local water supplies and seek to process all wastewater to comply with environmental requirements.

Sales, Marketing and Distribution

The principal markets for our fiber cement products are the United States, Australia, New Zealand, the Philippines, Canada, and in parts of Europe, including the United Kingdom and France. In addition, we have sold fiber cement products in many other markets, including China, Mongolia, Denmark, Germany, Hong Kong, India, the Middle East (Israel, Saudi Arabia, Lebanon and the United Arab Emirates), various Pacific Islands, Singapore, South Korea, Taiwan, and Vietnam. Our brand name, customer education in comparative product advantages, differentiated product range and customer service, including technical advice and assistance, provide the basis for our marketing strategy.

We offer our customers support through a specialized fiber cement sales force and customer service infrastructure in the United States, Australia, New Zealand, the Philippines and Europe.

Table of Contents

The customer service infrastructure includes inbound customer service support coordinated nationally in each country, and is complemented by outbound telemarketing capability. Within each regional market, we provide sales and marketing support to building products dealers and lumber yards and also provide support directly to the customers of these distribution channels, principally homebuilders and building contractors.

We maintain dedicated regional sales management teams in our major sales territories, with our national sales managers and national account managers, together with regional sales managers and sales representatives, maintaining relationships with national and other major accounts. Our various sales forces, which in some instances manage specific product categories, include skilled trades people who provide on-site technical advice and assistance.

In the United States, we sell fiber cement products for new residential construction predominantly to distributors, which then sell these products to dealers or lumber yards. This two-step distribution process is supplemented with direct sales to dealers and lumber yards as a means of accelerating product penetration and sales. Repair and remodel products in the United States are typically sold through the large home center retailers and specialist distributors. Our products are distributed across the United States and Canada primarily by road and, to a lesser extent, by rail.

In Australia and New Zealand, both new construction and repair and remodel products are generally sold directly to distributor/hardware stores and lumber yards rather than through the two-step distribution process. In the Philippines, a network of thousands of small to medium size dealer outlets sell our fiber cement products to consumers, builders and real estate developers, although in recent years, do-it-yourself type stores have started to enter the Philippines market. The physical distribution of our product in each country is primarily by road or sea transport. Products manufactured in Australia, New Zealand and the Philippines are also exported to a number of markets in Asia, various Pacific Islands, and the Middle East by sea transport.

Despite the fact that distributors and dealers are generally our direct customers, we also aim to increase primary demand for our products by marketing our products directly to homeowners, architects and builders. We encourage them to specify and install our products because of the quality and craftsmanship of our products. This “pull through” strategy, in turn, assists us in expanding sales for our distribution network as distributors benefit from the increasing demand for our products.

Geographic expansion of our fiber cement business has occurred in markets where framed construction is prevalent for residential applications or where there are opportunities to change building practices from masonry to framed construction. Expansion is also possible where there are direct substitution opportunities irrespective of the methods of construction. Our entry into the Philippines is an example of the ability to substitute fiber cement for an alternative product (in this case plywood). With the exception of our current major markets, as well as Japan and certain rural areas in Asia, Scandinavia, and Eastern Europe, most markets in the world principally utilize masonry construction for external walls in residential construction. Accordingly, further geographic expansion depends substantially on our ability to provide alternative construction solutions and for those solutions to be accepted in those markets.

Table of Contents

Dependence on Trade Secrets and Research and Development (“R&D”)

We pioneered the successful development of cellulose reinforced fiber cement and, since the early-1980s, have progressively introduced products developed as a result of our proprietary product formulation and process technology. The introduction of differentiated products is one of the core components of our global business strategy. This product differentiation strategy is supported by our significant investment in R&D activities.

We view spending on R&D as the key to sustaining our existing product leadership position, by providing a continuous pipeline of innovative new products and technologies with sustainable performance and design advantages over our competitors. Further, through our investments in new process technology or by modifying existing process technology, we aim to keep reducing our capital and operating costs and to find new ways to make existing and new products. As such, we expect to continue allocating significant funding to these endeavors. For fiscal years 2017, 2016 and 2015, our expenses for R&D were US$30.3 million, US$29.5 million and US$31.7 million, respectively.

Our current patent portfolio is based mainly on fiber cement compositions, associated manufacturing processes and the resulting products. Our non-patented technical intellectual property consists primarily of our operating and manufacturing know-how and raw material and operating equipment specifications, all of which are maintained as trade secret information. We have enhanced our abilities to effectively create, manage and utilize our intellectual property and have implemented a strategy that increasingly uses patenting and trade secret protection to protect and increase our competitive advantage.

In addition, we own a variety of licenses; industrial, commercial and financial contracts; and manufacturing processes. While we are dependent on the competitive advantage that these items provide as a whole, we are not dependent on any one of them individually and do not consider any one of them individually to be material. We do not materially rely on intellectual property licensed from any outside third parties. However, we cannot assure that our intellectual property and other proprietary information will be protected in all cases. In addition, if our R&D efforts fail to generate new, innovative products or processes, our overall profit margins may decrease and demand for our products may fall. See “Section 3 – Risk Factors.”

Governmental Regulation

As an Irish plc, we are governed by the Irish Companies Act 2014 and are also subject to all applicable European Union level legislation. We also operate under the regulatory requirements of numerous jurisdictions and organizations, including the ASX, ASIC, the NYSE, the SEC, the Irish Takeover Panel and various other federal, state, local and foreign rulemaking bodies. See “Section 3 – Constitution” for additional information regarding the Irish Companies Act 2014 and regulations to which we are subject.

Environmental, Health and Safety Regulation

Our operations and properties are subject to extensive federal, state, local and foreign environmental protection, health and safety laws, regulations and ordinances governing activities and operations that may have adverse environmental effects. As it relates to our operations, our

Table of Contents

manufacturing plants produce regulated materials, including waste water and air emissions. The waste water produced from our manufacturing plants is internally recycled and reused before eventually being discharged to publicly owned treatment works, a process which is monitored by us, as well as by regulators. In addition, we actively monitor air emissions and other regulated materials produced by our plants so as to ensure compliance with the various environmental regulations under which we operate.

Some environmental laws provide that a current or previous owner or operator of real property may be liable for the costs of investigation, removal or remediation of certain regulated materials on, under, or in that property or other impacted properties. In addition, persons who arrange, or are deemed to have arranged, for the disposal or treatment of certain regulated materials may also be liable for the costs of investigation, removal or remediation of the regulated materials at the disposal or treatment site, regardless of whether the affected site is owned or operated by such person. Environmental laws often impose liability whether or not the owner, operator, transporter or arranger knew of, or was responsible for, the presence of such regulated materials. Also, third parties may make claims against owners or operators of properties for personal injuries, property damage and/or for clean-up associated with releases of certain regulated materials pursuant to applicable environmental laws and common law tort theories, including strict liability.

In the past, from time to time, we have received notices of alleged discharges in excess of our water and air permit limits. In each case, and in compliance with our Environmental Policy, we have addressed the concerns raised in those notices, in part, through enhanced administrative controls and/or capital expenditures intended to prevent future discharges in excess of permitted levels and, on occasion, the payment of associated minor fines.

Environmental compliance costs in the future will depend, in part, on continued oversight of operations, expansion of operations and manufacturing activities, regulatory developments and future requirements that cannot presently be predicted.

Table of Contents

Organizational Structure

JHI plc is incorporated and domiciled in Ireland and the table below sets forth our significant subsidiaries, all of which are wholly-owned by JHI plc, either directly or indirectly, as of 30 April 2017.

Property, Plants and Equipment

We believe we have some of the largest and lowest cost fiber cement manufacturing plants across the United States, Australia and New Zealand, with our plants servicing both domestic and export markets. Our plants are ideally located to take advantage of established transportation networks, allowing us to distribute our products into key markets, while also providing easy access to key raw materials.

Table of Contents

Manufacturing Capacity

At 31 March 2017, we had manufacturing facilities at the following locations:

Table of Contents

We continually evaluate the capacity required to service the US housing market, and as a result, to ensure we meet demand and achieve our market penetration objectives, we have completed and continue to start-up and commission several lines across our manufacturing network. For a discussion of significant active and recently completed capacity expansion projects, see “Capital Expenditures.”

Beginning in the fourth quarter of fiscal year 2016, management determined that for measuring the annual flat sheet design capacity of the fiber cement network, the calculation should incorporate our historical experience with certain factors such as demand, product mix of varying thickness and density, batch size, plant availability and differing production speeds multiplied by 24 hours per day, seven days per week. Additionally, commencing in the second quarter of fiscal year 2017, management adjusted the definition of plant availability pertaining to idled, non-commissioned, and start-up lines when determining annual flat sheet design capacity and capacity utilization.

Based on the methodology noted above, for the year ended 31 March 2017, we had an annual flat sheet design capacity of 2,879 mmsf and 619 mmsf in the United States and Asia Pacific, respectively. It is important to note that annual design capacity does not necessarily reflect the actual capacity utilization rates of our manufacturing facilities, with actual utilization affected by factors such as demand, product mix, batch size, plant availability and production speeds. For fiscal year 2017, actual capacity utilization across our plants was an average of 94% and 92% in the United States and Asia Pacific, respectively.

Based on the “design capacity methodology” as defined above, for the year ended 31 March 2016, we had an annual flat sheet design capacity of 2,500 mmsf and 659 mmsf in the United States and Asia Pacific, respectively. It is important to note that annual design capacity does not necessarily reflect the actual capacity utilization rates of our manufacturing facilities, with actual utilization affected by factors such as demand, product mix, batch size, plant availability and production speeds. For fiscal year 2016, actual capacity utilization across our plants was an average of 89% in the United States and Asia Pacific.

During the first quarter of fiscal year 2016, we completed the sale of our Blandon, Pennsylvania location and our Australian Pipes business.

Mines

We lease silica quartz mine sites in Tacoma, Washington and Reno, Nevada. The lease for our quartz mine in Tacoma, Washington expires in February 2018 (with options to renew). The lease for our silica quartz mine site in Reno, Nevada expires in January 2019. We also had leased a mining site for silica in Victorville, California; however, that lease expired on 31 May 2016 and has not been renewed. Further, we own an additional property in Victorville, California which could be mined for silica. As of 30 April 2017, however, we have not begun to mine this site and have no immediate plans to do so. Finally, we continue to lease a parcel of land in Victorville, California adjacent to and for access to our owned property, as well as providing an equipment area for mining operations.

Table of Contents

As a mine operator, we are required by Section 1503(a) of the Dodd-Frank Wall Street Reform and Consumer Protection Act (the “Dodd-Frank Act”), and rules promulgated by the SEC implementing that section of the Dodd-Frank Act, to provide certain information concerning mine safety violations and other regulatory matters concerning the operation of our mines. During fiscal year 2017, we did not receive any notices, citations, orders, legal action or other communication from the US Department of Labor’s Mine Safety and Health Administration that would necessitate additional disclosure under Section 1503(a) of the Dodd-Frank Act. Similarly, we have not experienced any mining-related fatalities in our mining operations. There are currently no pending legal actions before the Federal Mine Safety and Health Review Commission related to our mining operations.

Capital Expenditures

We utilize a mix of operating cash flow and debt facilities to fund our capital expenditure projects and investments. We continuously invest in equipment maintenance and upgrades to ensure continued environmental compliance and operating effectiveness of our plants. The following table sets forth our capital expenditures for the three most recent fiscal years:

Significant active capital expenditures

At 31 March 2017, the following significant capital expenditures related to capacity projects remain in progress:

Table of Contents

Significant completed capital expenditure projects

The following is a list of significant capital expenditure projects we have invested in over the three most recent fiscal years:

Capital Divestitures

During the three most recent fiscal years, we did not make any material capital divestitures. On 30 June 2015, we finalized the sale of our Australian Pipes business. Additionally, on 1 June 2015 we finalized the sale of our Blandon, Pennsylvania location. We do not consider the disposition of the pipes business or sale of Blandon, Pennsylvania location material divestitures or strategic shifts in the nature of our operations.

Table of Contents

DIRECTORS, SENIOR MANAGEMENT AND EMPLOYEES

James Hardie Executive Team

Our management is overseen by our executive team, whose members cover the key areas of fiber cement R&D, production, manufacturing, human resources, marketing, investor relations, finance and legal.

Members of our executive team at 30 April 2017 (in alphabetical order) are:

Joe Blasko BSFS, JD

General Counsel and Chief Compliance Officer

Age 50

Joe Blasko joined James Hardie as General Counsel and Chief Compliance Officer in June 2011.

Before joining James Hardie, Mr Blasko was Assistant General Counsel, and later, the General Counsel at Liebert Corporation, an Emerson Network Power Systems company and wholly-owned subsidiary of Emerson Electric Co. In his four years with Liebert/Emerson, Mr Blasko was responsible for establishing the legal department in Columbus, Ohio, managing and overseeing all legal matters and working closely with the executive management team. In this role, Mr Blasko also had global responsibilities which required expertise across multiple jurisdictions.

From 2004 to 2006, Mr Blasko was Associate General Counsel at The Scotts Miracle-Gro Company, serving as the effective “general counsel” to numerous corporate divisions within the organization. From 1997 to 2004, Mr Blasko gained considerable regulatory and litigation expertise working at Vorys, Sater, Seymour and Pease LLP in Ohio.

Mr Blasko has a Juris Doctor from Case Western Reserve University in Cleveland, Ohio, USA and a Bachelor of Science in Foreign Service from Georgetown University, USA, with a specialty in International Relations, Law and Organizations.

Table of Contents

Sean Gadd BEng, MBA

Executive Vice President, Markets and Segments

Age 44

Sean Gadd joined James Hardie in 2004 as a Regional Engineering Manager for the Asia Pacific business, and progressed to Plant Manager for both the Carole Park and Rosehill facilities in Australia. Mr Gadd then moved to the US in 2006 to take the role of Manufacturing Manager for Trim and various manufacturing facilities across the US.

In 2009, Mr Gadd ran the US trim business for James Hardie with responsibility for both Manufacturing and Sales, followed by a brief assignment leading Supply Chain. In 2012, Mr Gadd was promoted to the role of Vice President of Sales for Western USA and Canada. Over the next year, his role was expanded to include the Midwest and Northeast of the USA.

Mr Gadd was appointed Executive General Manager in September 2013 with full responsibility for the Northern Division. In October 2015, he was appointed Executive Vice President, Markets and Segments, North America with responsibility for Strategic Marketing and Development.

Mr Gadd has a Bachelor of Engineering in Manufacturing Management and an executive MBA from the Australian Graduate School of Management, Australia.

Louis Gries BSc, MBA

Chief Executive Officer

Age 63

Louis Gries joined James Hardie as Manager of the Fontana fiber cement plant in California in February 1991 and was appointed President of James Hardie Building Products, Inc. in December 1993. Mr Gries became Executive Vice President – Operations in January 2003, responsible for operations, sales and marketing in our businesses in the Americas, Asia Pacific and Europe.

He was appointed Interim Chief Executive Officer (“CEO”) in October 2004 and became CEO in February 2005. In addition to being the Company’s CEO, Mr Gries is responsible for managing the Company’s fiber cement operations in North America.

Before he joined James Hardie, Mr Gries worked for 13 years for USG Corp, including a variety of roles in research, plant quality and production, and product and plant management.

Mr Gries has a Bachelor of Science in Mathematics from the University of Illinois, USA and an MBA from California State University, Long Beach, USA.

Table of Contents

Ryan Kilcullen BSc, MS

Executive Vice President – Operations

Age 36

Ryan Kilcullen joined James Hardie in 2007 as a PcI/PdI Engineer. Since then, he has worked for the Company in various manufacturing and supply chain roles including Process Engineer, Production Manager, and Supply Chain Engineer. In 2012, he became Supply Chain Manager, ColorPlus Business Unit, responsible for the end-to-end design and performance of our ColorPlus product line supply chain. In 2013, he became responsible for North American Supply Chain operations, with responsibilities that included Procurement, Network Planning, Production Planning, Transportation, Distribution Management, Customer Service, and Inside Sales. In June 2015, he was appointed Vice President – Central Operations, responsible for the Company’s Supply Chain Operations and Centralized Manufacturing functions.

In August 2016, he was appointed Executive Vice President – Operations, responsible for the Company’s Supply Chain, Manufacturing, Engineering, and Environmental, Health & Safety Operations.

Mr Kilcullen has a Bachelor of Science in Industrial Engineering from Rensselaer Polytechnic Institute and a Master of Engineering in Logistics from Massachusetts Institute of Technology.

Table of Contents

Matthew Marsh BA, MBA

Chief Financial Officer and Executive Vice President – Corporate

Age 42

Matthew Marsh joined James Hardie as Chief Financial Officer (“CFO”) in June 2013. As CFO he oversees the Company’s overall financial activities, including accounting, tax, treasury, performance and competitor analysis, internal audit and financial operations.

Effective 16 October 2015, Mr Marsh’s role was expanded to include the role of Executive Vice President – Corporate. In this role, Mr Marsh continues his oversight of the Company’s overall financial management in addition to the oversight of James Hardie’s information systems, legal and compliance, and investor and media relations functions. He continues to report to the Company’s Chief Executive Officer, Mr Louis Gries.

After a 16-year career at General Electric Company (“GE”), Mr Marsh brings a strong background in financial management. Before joining James Hardie, Mr Marsh most recently served as CFO of GE Healthcare’s IT business. Prior to being named CFO of GE Healthcare IT, Mr Marsh oversaw the finance operations for GE Healthcare’s US Healthcare Systems and US Diagnostic Imaging businesses.

Prior to those appointments, Mr Marsh travelled globally with the GE Internal Audit Staff gaining extensive experience in several industries including appliances, information services, distribution and supply, aviation, plastics, financial services, capital markets and healthcare, across more than twenty countries. Mr Marsh has graduated from GE’s Financial Management Program (FMP).

Mr Marsh has a Bachelor of Arts in Economics and Public Affairs from Syracuse University, USA and an MBA from University of Chicago’s Booth School of Business, USA.

Jason Miele, BA

Vice President, Investor and Media Relations

Age 40

Jason Miele was appointed to the position of Vice President – Investor and Media Relations in February 2017. Mr Miele has responsibility for overseeing the Company’s investor relations strategy and successful interface with external audiences, communicating the Company’s business strategy and its financial performance to various stakeholders including shareholders, investment analysts, and the financial media.

Mr Miele has 19 years of relevant professional experience, including 10 years of experience with James Hardie, where he has served in various finance and operational support roles, most recently as James Hardie’s Group Controller, a position he has held since 2013.

Mr Miele has a Bachelor’s Degree from the University of California at Santa Barbara, where he graduated with a degree in Business Economics with an emphasis in Accounting.

Table of Contents

Kirk Williams BA, JD

Chief Human Resources Officer

Age 41

Kirk Williams joined James Hardie in 2017 as Chief Human Resources Officer. Mr Williams brings 16 years of experience in human resources gained while employed at Walmart, Honeywell International, Allianz Life Insurance Company of North America and American Express.

Most recently, he was Vice President of Human Resources at Archer Daniels Midland, where he served as a strategic business partner for two of the company’s four business units and had human resources responsibility for the Latin and South American businesses. Prior to those roles, Mr Williams held various management positions within Walmart.

Through his broad experience across a diverse group of industries, Mr Williams has developed a strong background in a broad range of areas, including employee engagement, talent management, leadership development, cultural initiatives, compensation, benefits and human resources management.

Mr Williams has a Juris Doctor from Chicago-Kent College of Law where he graduated with Honors and a Bachelor of Arts (International Relations) from Kent State University where he graduated Cum Laude.

Table of Contents

Board of Directors

James Hardie’s directors have widespread experience, spanning general management, finance, law, marketing and accounting. Each director also brings valuable international experience that assists with James Hardie’s growth.

Members of the Board of Directors (the “Board”) at 31 March 2017 are:

Michael Hammes BS, MBA

Age 75

Michael Hammes was elected as an independent non-executive director of James Hardie in February 2007. He was appointed Chairman of the Board in January 2008 and is a member of the Audit Committee, the Remuneration Committee and the Nominating and Governance Committee.

Experience: Mr Hammes has extensive commercial experience at a senior executive level. He has held a number of executive positions in the medical products, hardware and home improvement, and automobile sectors, including CEO and Chairman of Sunrise Medical, Inc. (2000-2007), Chairman and CEO of Guide Corporation (1998-2000), Chairman and CEO of Coleman Company, Inc. (1993-1997), Vice Chairman of Black & Decker Corporation (1992-1993) and various senior executive roles with Chrysler Corporation (1986-1990) and Ford Motor Company (1979-1986).

Directorships of listed companies in the past five years: Former – Director of Navistar International Corporation (1996-2017); Director of DynaVox Mayer-Johnson (2010-2016).

Other: Resident of the United States.

Last elected: August 2016

Term expires: August 2019

Table of Contents

Brian Anderson BS, MBA, CPA

Age 66

Brian Anderson was appointed as an independent non-executive director of James Hardie in December 2006. He is Chairman of the Audit Committee and a member of the Remuneration Committee.

Experience: Mr Anderson has extensive financial and business experience at both executive and board levels. He has held a variety of senior positions, with thirteen years at Baxter International, Inc., including Corporate Vice President of Finance, Senior Vice President and CFO (1997-2004) and, more recently, Executive Vice President and CFO of OfficeMax, Inc. (2004-2005). Earlier in his career, Mr Anderson was an Audit Partner of Deloitte & Touche LLP (1986-1991).

Directorships of listed companies in the past five years: Current – Director of Stericycle Inc. (since January 2017); Director of PulteGroup (since 2005); Director of W.W. Grainger, Inc. (since 1999). Former – Chairman (2010-2016) and Director (2005-2016) of A.M. Castle & Co.; Lead Director of W.W. Grainger, Inc. (2011-2014).

Other: Member of the Governing Board of the Center for Audit Quality (since September 2016); resident of the United States.

Last elected: August 2015

Term expires: August 2017

Table of Contents

Russell Chenu BCom, MBA

Age 67

Russell Chenu was appointed as a non-executive director of James Hardie in August 2014. He is a member of the Remuneration Committee and the Nominating and Governance Committee.

Experience: Mr Chenu joined James Hardie as Interim CFO in October 2004 and was appointed CFO in February 2005. He was elected to the Company’s Managing Board at the 2005 Annual General Meeting, re-elected in 2008 and continued as a member of the Managing Board until it was dissolved in June 2010. As CFO, he was responsible for accounting, treasury, taxation, corporate finance, information technology and systems, and procurement. Mr Chenu retired as CFO in November 2013.

Mr Chenu is an experienced corporate and finance executive who held senior finance and management positions with a number of Australian publicly-listed companies. In a number of these senior roles, he was engaged in significant strategic business planning and business change, including several turnarounds, new market expansions and management leadership initiatives.

Mr Chenu has a Bachelor of Commerce from the University of Melbourne and an MBA from Macquarie Graduate School of Management, Australia.

Directorships of listed companies in the past five years: Current – Director of Reliance Worldwide Corporation Limited (since 2016); Director of CIMIC Group Limited (since 2014); Director of Metro Performance Glass Limited (since 2014).

Other: Resident of Australia.

Last elected: August 2014

Term expires: August 2017

Table of Contents

David D. Harrison BA, MBA, CMA

Age 70

David Harrison was appointed as an independent non-executive director of James Hardie in May 2008. He is Chairman of the Remuneration Committee and a member of the Audit Committee.

Experience: Mr Harrison is an experienced company director with a finance background, having served in corporate finance roles, international operations and information technology for 22 years with Borg Warner/General Electric Co. His previous experience includes 10 years at Pentair, Inc., as Executive Vice President and CFO (1994-1996 and 2000-2007) and Vice President and CFO roles at Scotts, Inc. and Coltec Industries, Inc. (1996-2000).

Directorships of listed companies in the past five years: Current – Director of National Oilwell Varco (since 2003). Former – Director of Navistar International Corporation (2007-2012).

Other: Resident of the United States.

Last elected: August 2016

Term expires: August 2019

Andrea Gisle Joosen MSc, BSc

Age 53

Andrea Gisle Joosen was appointed as an independent non-executive director of James Hardie in March 2015. She is a member of the Audit Committee.

Experience: Ms Gisle Joosen is an experienced former executive with extensive experience in marketing, brand management and business development across a range of different consumer businesses. Her former roles include Chief Executive of Boxer TV Access AB in Sweden and Managing Director (Nordic region) of Panasonic, Chantelle AB and Twentieth Century Fox. Her early career involved several senior marketing roles with Procter & Gamble and Johnson & Johnson.

Directorships of listed companies in the past five years: Current – Director of Mr Green AB (since 2015; listed November 2016); Director of BillerudKorsnas AB (since 2015); Director of Dixons Carphone plc (since 2014); Director of ICA Gruppen AB (since 2010). Former – Director of Dixons Retail plc (2012-2013).

Other: Director of Teknikmagasinet AB (since 2015); Director of Neopitch AB (since 2004); resident of Sweden.

Last elected: August 2015

Term expires: August 2018

Table of Contents

Alison Littley BA, FCIPS

Age 54

Alison Littley was appointed as an independent non-executive director of James Hardie in February 2012. She is a member of the Audit Committee and the Remuneration Committee.

Experience: Ms Littley has substantial experience in multinational manufacturing and supply chain operations, and she brings a strong international leadership background building effective management teams and third party relationships. She has held a variety of positions, most recently as Chief Executive of Buying Solutions, a UK Government Agency responsible for procurement of goods and services on behalf of UK government and public sector bodies (2006-2011). She has previously held senior management roles in Diageo plc (1999-2006) and Mars, Inc. (1981-1999).

Directorships of listed companies in the past five years: None.

Other: Director of Weightmans LLP (since 2013); Director of Eakin Healthcare Limited (since 2015); resident of the United Kingdom.

Last elected: August 2015

Term expires: August 2018

James Osborne BA Hons, LLB

Age 68

James Osborne was appointed as an independent non-executive director of James Hardie in March 2009. He is a member of the Nominating and Governance Committee.

Experience: Mr Osborne is an experienced company director with a strong legal background and a considerable knowledge of international business operations in North America and Europe. His career includes 35 years with the leading Irish law firm, A&L Goodbody, in roles which included opening the firm’s New York office in 1979 and serving as the firm’s managing partner (1982-1994). He has served as a consultant to the firm since 1994. Mr Osborne also contributed to the listing of Ryanair in London, New York and Dublin and continues to serve on Ryanair’s board.

Directorships of listed companies in the past five years: Current – Director of Ryanair Holdings plc (since 1996); Chairman and Director of Oneview Healthcare plc (since 2013). Former – Chairman of Independent News & Media (2011-2012).

Other: Chairman of Eason Holdings plc (since 2013); Chairman of Jellia Holdings Limited (since 2014); Chairman of ELST (since 2012); resident of Ireland.

Last elected: August 2015

Term expires: August 2018

Table of Contents

Rudolf van der Meer M.Ch.Eng

Age 72

Rudy van der Meer was appointed as an independent non-executive director of James Hardie in February 2007. He is Chairman of the Nominating and Governance Committee.

Experience: Mr van der Meer is an experienced former executive, with considerable knowledge of international business and the building and construction sector. During his 32-year association with Akzo Nobel N.V., he held a number of senior positions including CEO of Coatings (2000-2005), CEO of Chemicals (1993-2000), and member of the five person Executive Board (1993-2005).

Directorships of listed companies in the past five years: Current – Director of LyondellBasell Industries N.V. (since 2010). Former – Chairman of the Supervisory Board of Royal Imtech N.V. (2005-2013).

Other: Chairman of the Supervisory Board of VGZ Health Insurance (since 2011); resident of the Netherlands.

Last elected: August 2014

Term expires: August 2017

Table of Contents

Remuneration

The remuneration information provided in this Annual Report outlines the key remuneration and share ownership information for our Board of Directors and our Senior Executive Officers (defined below) for fiscal year 2017. We are not required to produce a remuneration report under applicable Irish, Australian or US rules or regulations. However, taking into consideration our significant Australian and US shareholder bases and our primary listing on the ASX, we have voluntarily produced a remuneration report consistent with those provided by similarly situated companies for non-binding shareholder approval since 2005 and we intend to continue to do so for fiscal year 2017. A more extensive remuneration report, which further details our remuneration policies and practices will be provided separately to our shareholders in July 2017, together with the 2017 Notice of Annual General Meeting (“AGM”) and accompanying materials.

For fiscal year 2017, our senior executive officers (Chief Executive Officer (“CEO”), Chief Financial Officer (“CFO”) and the other three highest paid executive officers based on total compensation that was earned or accrued for fiscal year 2017) (“Senior Executive Officers”) are:

Mr Fisher is included in this remuneration discussion based on his level of compensation and status as an executive officer as of 31 March 2017. Subsequent to 31 March 2017, Mr Fisher voluntarily terminated his employment with us as of 3 April 2017.

Description of 2017 Remuneration Elements

Base Salaries and Other Fixed Remuneration Benefits

Base salary provides a guaranteed level of income that recognizes the market value of the position and internal equities between roles, and the individual’s capability, experience and performance. Annual base salary increases are not automatic. Base salaries for Senior Executive Officers are positioned around the market median for positions of similar responsibility and are reviewed by the Remuneration Committee each year.

In addition, Senior Executive Officers may receive certain other limited fixed benefits, such as medical and life insurance benefits, car allowances, participation in executive wellness programs and an annual financial planning allowance. For fiscal year 2017, the base salary and value of other fixed benefits for each of our Senior Executive Officers is provided in the Base Pay and Other Benefits columns of the remuneration table in the section titled “Remuneration Paid to Senior Executive Officers”.

Retirement Plan

In every country in which we operate, we offer employees access to pension, superannuation or individual retirement savings plans consistent with the laws of the respective country.

Table of Contents

In the US, we sponsor a defined contribution plan, the James Hardie Retirement and Profit Sharing Plan (the “401(k) Plan”). The 401(k) Plan is a tax-qualified retirement and savings plan covering all US employees, including our Senior Executive Officers, subject to certain eligibility requirements. Participating employees were able to elect to reduce their current annual compensation by up to US$18,000 in calendar year 2016 and have the amount of such reduction contributed to the 401(k) Plan, with a maximum eligible compensation limit of US$265,000. In addition, we match employee contributions dollar for dollar up to a maximum of the first 6% of an employee’s eligible compensation.

Incentive Arrangements

In addition to the base salary and other fixed benefits provided to our Senior Executive Officers, the Remuneration Committee reviews and approves a combination of both short-term and long-term variable incentive programs on an annual basis. For fiscal year 2017, our variable incentive plans for Senior Executive Officers were as follows:

STI Plans

On an annual basis, the Remuneration Committee approves an STI target for all Senior Executive Officers, expressed as a percentage of base salary, which is allocated between individual goals and Company goals under the IP and CP Plans, respectively. For fiscal year 2017, the STI target percentage for Mr Gries was 125% of base salary, 70% of base salary for Mr Marsh, and 60% of base salary for Messrs Fisher, Gadd and Blasko, with 80% allocated to the CP Plan and 20% allocated to the IP Plan for all Senior Executive Officers.

Since fiscal year 2014, the Remuneration Committee has applied a ‘circuit breaker’ to the STI plans, which for Senior Executive Officers will prevent payment of any STI under the CP and IP Plans unless our performance exceeds a level approved by the Remuneration Committee each year. For fiscal year 2017, the ‘circuit breaker’ was set at 60% of our fiscal year 2017 plan Adjusted EBIT (indexed to housing starts) less any impairment costs the Remuneration Committee determines should be disregarded.

Table of Contents

CP Plan

The CP Plan is based on a series of payout matrices for the US and Asia Pacific businesses, which provide a range of possible payouts depending on our performance against hurdles which assess volume growth relative to, and above, market (“Growth Measure”), earnings (“Return Measure”), and for the US business, performance of the interiors business and performance against certain “wood-look” competitors. Each Senior Executive Officer can receive between 0% and 300% of their STI target allocated to the CP Plan based on the results of the payout multiple the Senior Executive Officer is tied to. All Senior Executive Officers are tied to either the US multiple (Mr Gadd) or a composite multiple derived from the metrics for the US (80%) and Asia Pacific (20%) businesses combined (Messrs Gries, Marsh, Fisher and Blasko).

IP Plan

Under the IP Plan, the Remuneration Committee approves a series of one-year individual performance goals which, along with goals on our core organizational values, are used to assess the performance of our Senior Executive Officers. The IP Plan links financial rewards to the Senior Executive Officer’s achievement of specific objectives that have benefited us and contributed to shareholder value, but are not captured directly by financial measures in the CP Plan. Each Senior Executive Officer can receive between 0% and 150% of their STI target allocated to the IP Plan based on achievement of individual performance and core organizational values goals.

STI Plan Performance for Fiscal Year 2017

For fiscal year 2017, the amount to be paid to each of our Senior Executive Officers under the STI Plans is provided in the STI Award column of the remuneration table in the section titled “Remuneration Paid to Senior Executive Officers.” A more in-depth discussion regarding our corporate performance relative to the CP Plan and Senior Executive Officer performance under the IP Plan will be provided in our remuneration report, which will be separately issued to shareholders in July 2017.

LTI Plans

Each year, the Remuneration Committee approves an LTI target for all Senior Executive Officers. The approved target is allocated between three separate components to ensure that each Senior Executive Officer’s performance is assessed across factors considered important for sustainable long-term value creation:

Table of Contents

Awards issued under the LTI Plans are issued pursuant to the terms of the LTIP. During fiscal year 2017, our Senior Executive Officers were granted the following awards under the LTIP:

RSUs issued under our LTI programs will be settled upon vesting in CUFS on a 1-to-1 basis. Unless the context indicates otherwise, when we refer to our common stock, we are referring to the shares of our common stock that are represented by CUFS.

Vesting criteria for each type of LTI award are as follows:

Table of Contents

A more in-depth discussion regarding our LTI Plans and the awards issued thereunder will be provided in our remuneration report, which will be separately issued to shareholders in July 2017.

Executive Compensation Practices

Clawback Provisions

The Remuneration Committee has established an executive performance-based compensation clawback policy in connection with performance-based compensation paid or awarded to certain executives. The clawback policy provides that the Board may, in all appropriate circumstances, recover from any current or former executive regardless of fault, that portion of any performance-based compensation erroneously awarded: (i) based on financial information required to be reported under applicable US or Australian securities laws or applicable exchange listing standards that would not have been paid in the three completed fiscal years preceding the year(s) in which an accounting restatement is required to correct a material error; or (ii) during the previous three completed fiscal year as a result of any errors or omissions in objective, calculable performance measures contained in formal papers presented to and relied upon by the Board for purposes of determining compensation to be paid or awarded, where the absence of such errors or omissions would have resulted in there being a material negative impact on the amount of performance-based compensation paid or awarded.

The clawback policy applies to any person designated as a participant by the Board in the annual LTI Plan and applies to any compensation that is granted, earned or vested based wholly or in part upon the attainment of any financial or other objective, calculable performance measure under any incentive, bonus, retirement or equity compensation plan maintained by the Company, including, without limitation, the STI Plan and LTI Plan. Salaries, discretionary bonuses, time-based equity awards and bonuses or equity awards based on subjective, non-financial measures, including strategic or personal performance metrics, are excluded.

Table of Contents

The excess compensation requiring recovery shall be the amount of performance-based compensation that an executive received, based on the erroneous data, less the amount that would have been paid to the executive based on the restated or corrected data. All recoverable amounts shall be calculated on a pre-tax basis. For equity awards still held at the time of the recovery, the recoverable amount shall be the amount vested in excess of the number that should have vested under the restated or corrected financial reporting measure. For vested equity awards which have already been sold, the recoverable amount shall be the sale proceeds the executive received with respect to the excess number of shares.

In addition, all LTI grants made to Messrs Gries and Fisher were subject to a specific clawback provision for violation of a limited non-compete provision that specifically prohibits executives from working for designated competitors or for any company that may enter the fiber cement market within two years of departure.

Stock Ownership Guidelines

The Remuneration Committee believes that Senior Executive Officers should hold a meaningful level of our stock to further align their interests with those of our shareholders. We have adopted stock ownership guidelines for the CEO and other Senior Executive Officers, respectively, which require them to accumulate holdings of three times and one times their base salary, respectively, in our stock over a period of five years from the effective date of the guidelines (1 April 2009) or the date the Senior Executive Officer first becomes subject to the applicable guideline.

Until the stock ownership guidelines have been met, Senior Executive Officers are required to retain at least 75% of shares obtained under our LTI Plans (net of taxes and other costs). Once Senior Executive Officers have met or exceeded their stock ownership guidelines, they are required to retain at least 25% of shares issued under our LTI Plans through the vesting of RSUs (net of taxes and other costs) for a period of two years (by way of a holding lock), after which time those shares can be sold (provided the Senior Executive Officer remains at or above the stock ownership guideline).

As of 31 March 2017, all Senior Executive Officers have achieved the minimum share accumulation threshold.

Equity Award Practices

Annual equity awards under the LTI Plan are generally approved by the Remuneration Committee in May of each year with awards generally issued in September of each year. We do not time the granting of equity awards to the disclosure of material information.

For details of the application of our insider-trading policy for equity award grant participants, including our prohibition on employee hedging transactions, see the “Insider Trading” section of this Annual Report.

Loans

We did not grant loans to Senior Executive Officers during fiscal year 2017. There are no loans outstanding to Senior Executive Officers.

Table of Contents

Employment and Severance Arrangements

During fiscal year 2017, we maintained employment agreements with each of Messrs Gries, Marsh and Fisher. Mr Fisher resigned from his employment on 3 April 2017, and as a result, his employment agreement is no longer in effect. Other than as provided under the terms of their respective employment agreements, no other termination payments are payable, except as required under the terms of the applicable STI or LTI plans.

Employment Agreement with Louis Gries

Below is a summary of the key terms of Mr Gries’ current employment agreement:

Table of Contents

Employment Agreement with Matt Marsh

Below is a summary of the key terms of Mr Marsh’s current employment agreement:

Table of Contents

Prior Employment Agreement with Mark Fisher

Prior to his resignation on 3 April 2017, we were a party to an employment agreement with Mr Fisher, which was effective as of 31 March 2006. Below is a summary of the key terms of Mr Fisher’s prior employment agreement:

Table of Contents

Remuneration Paid to Senior Executive Officers

Total Remuneration for Senior Executive Officers

Details of the remuneration for Senior Executive Officers in fiscal years 2017 and 2016 are set out below: